LoginForgot Password?RegisterWhy Register?

Watch Movements & Material Listing

We Carry Popular & Rare Calibers:

  • * ELEMEX
  • * ETA (Swiss)
  • * HATTORI
  • * ISA
  • * MIYOTA / CITIZEN
  • * PUW
  • * RONDA (Swiss & Swiss Parts)
  • * SE - Swiss Ebauche
  • * SEIKO
  • * MECHANICAL / AUTOMATIC

Also Listed Inside:

  • * MATERIAL (ETA Parts)
  • * CAPACITORS
  • * CALENDAR WHEELS
  • * CIRCUIT BOARDS
  • * HANDS
  • * STEMS
  • * QUARTZ CLOCKS
  • and
  • * INTERCHANGE INFORMATION
  • And More...

Abbreviations

2H 2-Hand movement (No Sweep) Li Lithium Battery
24H 24-Hour Hand Sw Swiss Made
D4 Calendar at "4" Angled or Hanging position on dial Disc. Discontinued Caliber
D4H Calendar at "4" Straight or Horizontal position on dial LIMITED Movement is discontinued or in short supply, but stock exists
D6 Calendar at "6" Ronda xxxx.B BIG Date
H0 aig.0 - Reduced Cannon Pinion (measure overall height) Ronda xxxx.C Day at "Center"
H2 aig.2 - Raised Cannon Pinion (measure overall height) Ronda xxxx.D Date
H3 aig.3 - High Cannon Pinion (measure overall height) Ronda xxxx.F Day and Month at "Center"
H4 aig.4 - Very High Cannon Pinion (measure overall height) Ronda xxxx.L Retro Day at "6"
H5 aig.5 - Super High Cannon Pinion (measure overall height) Ronda xxxx.N Retro Day at "12"
H6 aig.6 - Special Production (measure overall height) Ronda xxxx.P Asymmetrical

Top 50 Movements are Shaded Across in Yellow

Manufacturer Movement # Ligne Size MM Size Thickness Functions Dial Feet Hands Cell Interchange
ELEMEX 2550 5 1/2 x 6 3/4 13.0 x 15.15 2.70mm Swp 1 1/2 & 5 70/120/20 379 Ronda 753
ELEMEX 3D10 6 3/4 x 8 15.15 x 17.80 2.50mm Swp 5 1/2 & 12 1/2 70/120/18 364 Ronda 763
ELEMEX 3D44 6 3/4 x 8 15.15 x 17.80 2.50mm 5 1/2 & 12 1/2 70/120 364 Ronda 762
ELEMEX 5D15 10 1/2 23.30 2.50mm Swp 5&11, 7&12 1/2 70/120/18 371
ELEMEX 5D16 10 1/2 23.30 4.50mm Swp 5&11, 7&12 1/2 70/120/18 CR2016
ELEMEX 5D20 10 1/2 23.30 3.30mm D, Swp 5&11, 7&12 1/2 70/120/18 371
ETA 201.001 4 1/4 Round 10.40 2.25mm 4 jew, Electronic Set 50/90 321 NO SUB
ETA 210.001 9 1/4 Round 20.00 0.98mm 2 3/4 & 6 1/4 50/100 341
ETA 210.011 9 1/4 Round 20.00 1.50mm D 2 1/4 & 6 1/2 50/100 341 NO SUB
ETA 251.252 13 1/4 Round 29.80 5.00mm Chr, D 1 1/2 & 6 1/2 120/150/20 394 NO SUB
ETA 251.264 D4 BE 13 1/4 Round 29.80 5.00mm D@4, Chr (6H/3-Eye) 1 1/2 & 7 1/2 150/200/30/80 394
ETA 251.265 13 1/4 Round 29.80 5.00mm Alm, Chr (6H/3-Eye) 1 1/2 & 7 1/2 150/200/26/20 394 NO SUB
ETA 251.274 D4 CG 13 1/4 Round 29.80 4.60mm D@4, Chr (6H/3-Eye) 1 1/2 & 7 1/2 80/150/200 394
ETA 251.292 13 1/4 Round 29.80 5.00mm D@4, Chr (6H/3-Eye) 1 1/2 & 6 1/2 150/200/30/80 394
ETA 251.474 D4 ZB 10 1/2 Round 29.80 4.70mm D@4, Angled/Hanging 5 1/2 & 11 1/2 90/150/30/20 394
ETA 251.471 D4H 10 1/2 Round 29.80 4.70mm D@4, Straight/Horz. 5 1/2 & 11 1/2 90/150/30/20 394 251.471 D4H
ETA 252.611 11 1/2 Round 25.60 4.40mm Perpetual Cal, Swp 2 1/2 & 8 70/120/20 CR2016
ETA 255.112 11 1/2 Round 25.60 1.95mm D, Swp 2 1/2 & 8 1/2 70/120/20 373 Eta E64.111
ETA 255.121 11 1/2 Round 25.60 2.45mm DD, Swp 2 1/2 & 8 1/2 70/120/20 373 NO SUB
ETA 255.122 11 1/2 Round 25.60 2.45mm Day@12, D, Swp 2 1/2 & 8 1/2 70/120/20 373 NO SUB
ETA 255.241 10 1/2 Round 23.30 3.50mm D, Remote Swp 1 1/2 & 7 1/2 70/120/20/20 395 NO SUB
ETA 255.266 11 1/2 Round 25.60 2.45mm D, 24hr, Swp 2 1/2 & 7 1/2 70/120/20 373 NO SUB
ETA 255.412 10 1/2 Round 23.30 1.95mm D, Swp 1 1/2 & 7 1/2 70/120/20 373 Eta E63.111
ETA 255.421 10 1/2 Round 23.30 2.45mm DD, Swp 1 1/2 & 7 1/2 70/120/20 373 NO SUB
ETA 255.441 10 1/2 Round 23.30 1.95mm D 1 1/2 & 8 70/120 373 Eta E63.041
ETA 255.462 10 1/2 Round 23.30 2.45mm D, Swp 1 1/2 & 7 1/2 70/120/20 373
ETA 255.465 10 1/2 Round 23.30 2.85mm D, Swp 1 1/2 & 7 1/2 70/120/20 373 NO SUB
ETA 255.481 10 1/2 Round 23.30 2.70mm Chr, DD, Mn, Swp 2 & 8 70/120/160/20 373 NO SUB
ETA 255.483 10 1/2 Round 23.30 2.70mm Chr, D, Mn, Swp 2 & 8 70/120/160/20 373 NO SUB
ETA 255.563 10 1/2 Round 23.30 2.45mm D, Swp 70/120/20 373 NO SUB
ETA 256.031 8 1/4 Round 18.60 1.95mm 5 & 11 70/120 315 Eta E61.031
ETA 256.041 8 1/4 Round 18.60 1.95mm D 5 & 11 70/120 315 Eta E61.041
ETA 256.111 8 1/4 Round 18.60 1.95mm D, Swp 5 & 11 70/120/20 315
ETA 256.461 8 1/4 Round 18.60 2.45mm D, Swp 70/120/20 373
ETA 256.513 8 1/4 Round 18.60 1.95mm D, Swp 5 & 11 70/120/20 315 NO SUB
ETA 280.002 3 3/4 x 6 3/4 9.0 x 15.15 1.80mm 4 & 9 1/2 55/100 321
ETA 280.002 H2 3 3/4 x 6 3/4 9.0 x 15.15 1.80mm High CP 4 & 9 1/2 55/100 321
ETA 280.002 H3 3 3/4 x 6 3/4 9.0 x 15.15 1.80mm High CP 4 & 9 1/2 55/100 321
ETA 281.001 5 1/2 x 6 3/4 13.0 x 15.15 0.98mm 6 1/2 & 11 1/2 55/100 751 Eta E03.001
ETA 282.001 5 1/2 x 8 13.0 x 18.00 1.20mm 5 1/2 & 11 1/2 55/100 346
ETA 2824-2 11 1/2 Round 25.60 4.60mm D Swp, (SW 200-1) 4 & 11 90/150/20 Auto
ETA 2892-A2 11 1/2 Round 25.60 3.60mm D Swp, (SW 300-1) 2 1/2 & 8 1/2 90/150/25 Auto
ETA 7750 13 1/4 Round 29.80 7.90mm DD Swp, (SW 500-1) 1 & 7 120/200/25/18 Auto
ETA 400.001 6 3/4 x 8 15.15 x 17.80 2.75mm 3 1/2 & 8 1/2 70/120 377 Ronda 762
ETA 400.101 6 3/4 x 8 15.15 x 17.80 2.75mm Swp 3 1/2 & 8 1/2 70/120/20 377 Ronda 763
ETA 400.111 D6 8 1/4 Round 18.60 3.25mm D@6, Swp 1 1/2 & 8 1/2 70/120/20 377 NO SUB
ETA 400.411 D6 10 Round 22.00 3.25mm D@6, Swp 1 1/2 & 8 1/2 70/120/20 377
ETA 556.125 7 3/4 Round 17.20 3.25mm DD, Swp 5 & 11 70/120/20 364 $34.95
ETA 581.001 8 3/4 Round 19.40 3.20mm Remote Swp 5 1/2 & 11 60/110/16 397 NO SUB
ETA 801.004 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm 6 1/2 & 11 1/2 70/120 379 Ronda 751
ETA 801.104 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm Swp 6 1/2 & 11 3/4 70/120/20 379 Ronda 753
ETA 802.005 6 3/4 x 8 15.15 x 17.80 2.95mm 3 1/2 & 8 1/2 70/120 377 Ronda 762
ETA 802.105 6 3/4 x 8 15.15 x 17.80 2.95mm Swp 3 1/2 & 8 1/2 70/120/20 377 Ronda 763
ETA 803.114 8 3/4 Round 19.40 3.40mm D, Swp 4 & 11 70/120/20 377 Ronda 785
ETA 803.114 D6 8 3/4 Round 19.40 3.40mm D@6, Swp 4 & 11 70/120/20 377 Ronda 785 D6
ETA 803.124 8 3/4 Round 19.40 3.65mm DD, Swp 4 & 11 70/120/20 377 NO SUB
ETA 804.114 10 1/2 Round 23.30 3.40mm D, Swp 2 & 8 70/120/20 397 Ronda 505
ETA 804.114 D6 10 1/2 Round 23.30 3.40mm D@6, Swp 2 & 8 70/120/20 397 Ronda 505 D6
ETA 804.124 10 1/2 Round 23.30 3.65mm DD, Swp 2 & 8 70/120/20 397 Ronda 507
ETA 804.192 10 1/2 Round 23.30 3.40mm D, Alm, Swp 2 & 8 70/120/20 397
ETA 805.112 11 1/2 Round 25.60 3.65mm D, Swp, Swiss 2 1/2 & 8 1/2 70/120/20 377
ETA 805.114 11 1/2 Round 25.60 3.40mm D, Swp 2 1/2 & 8 1/2 70/120/20 397 Eta 805.111
ETA 805.114 D6 11 1/2 Round 25.60 3.40mm D@6, Swp 2 1/2 & 8 1/2 70/120/20 397 NO SUB
ETA 805.122 11 1/2 Round 25.60 3.65mm DD, Swp 2 1/2 & 8 1/2 70/120/20 397
ETA 805.124 11 1/2 Round 25.60 3.65mm DD, Swp 2 1/2 & 8 1/2 70/120/20 397 Ronda 517
ETA 805.144 11 1/2 Round 25.60 3.65mm Day@12, D, Swp 2 1/2 & 8 1/2 70/120/20 397 NO SUB
ETA 805.161 11 1/2 Round 25.60 3.65mm D, 24hr, Swp 2 1/2 & 8 1/2 70/120/20/160 397 NO SUB
ETA 901.001 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm 6 1/2 & 11 1/2 70/120 321
ETA 901.001 H0 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm Reduced CP 6 1/2 & 11 1/2 70/120 321
ETA 901.001 H3 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm High CP 6 1/2 & 11 1/2 70/120 321
ETA 901.005 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm 6 1/2 & 11 1/2 70/120 321 Eta 901.001
ETA 902.002 5 1/2 x 6 3/4 13.0 x 15.15 2.35mm 7 & 11 1/2 70/120 364
ETA 902.005 6 3/4 x 8 15.15 x 17.80 2.35mm 7 & 11 1/2 70/120 364 Eta 902.002
ETA 902.101 5 1/2 x 6 3/4 13.0 x 15.15 2.35mm Swp 7 & 11 1/2 70/120/20 364
ETA 902.105 6 3/4 x 8 15.15 x 17.80 2.35mm Swp 7 & 11 1/2 70/120/20 364 Eta 902.101
ETA 902.505 6 3/4 x 8 15.15 x 17.80 2.35mm Remote Swp 7 & 11 1/2 70/120/20 364
ETA 927.402 5 1/2 x 8 13.0 x 17.80 2.95mm Swp 5 1/2 & 11 1/2 70/120/20 362 NO SUB
ETA 955.112-2H 11 1/2 Round 25.60 2.50mm D, 2-Hand, H0 2 1/2 & 8 1/2 70/120 371
ETA 955.112 11 1/2 Round 25.60 2.50mm D, Swp 2 1/2 & 8 1/2 70/120/20 371
ETA 955.112 H0 11 1/2 Round 25.60 2.50mm D, Swp, Reduced CP 2 1/2 & 8 1/2 70/120/20 371
ETA 955.112 H3 11 1/2 Round 25.60 2.50mm D, Swp, High CP 2 1/2 & 8 1/2 70/120/20 371
ETA 955.122 11 1/2 Round 25.60 3.00mm DD, Swp 2 1/2 & 8 1/2 70/120/20 371
ETA 955.124 11 1/2 Round 25.60 3.00mm DD, Swp 2 1/2 & 8 1/2 70/120/20 371 Eta 955.122
ETA 955.132 11 1/2 Round 25.60 3.00mm D@12, D, Swp 2 1/2 & 8 1/2 70/120/20 371
ETA 955.132 D6 11 1/2 Round 25.60 3.00mm D@12, D@6, Swp 2 1/2 & 8 1/2 70/120/20 371
ETA 955.412-2H 10 1/2 Round 23.30 2.50mm D, 2-Hand, H0 2 & 8 70/120 371
ETA 955.412 10 1/2 Round 23.30 2.50mm D, Swp 2 & 8 70/120/20 371
ETA 955.412 H0 10 1/2 Round 23.30 2.50mm D, Swp, Reduced CP 2 & 8 70/120/20 371
ETA 955.412 H3 10 1/2 Round 23.30 2.50mm D, Swp, High CP 2 & 8 70/120/20 371
ETA 955.414 10 1/2 Round 23.30 2.50mm D, Swp 2 & 8 70/120/20 371 Eta 955.412
ETA 955.422 10 1/2 Round 23.30 3.00mm DD, Swp 2 & 8 70/120/20 371
ETA 955.424 10 1/2 Round 23.30 3.00mm DD, Swp 2 & 8 70/120/20 371 Eta 955.422
ETA 955.432 10 1/2 Round 23.30 2.50mm 2 & 8 70/120 371
ETA 956.032 7 3/4 Round 17.20 2.50mm 4 & 11 70/120 364
ETA 956.112-2H 7 3/4 Round 17.20 2.50mm D, 2-Hand, H0 4 & 11 70/120 364
ETA 956.112 7 3/4 Round 17.20 2.50mm D, Swp 4 & 11 70/120/20 364
ETA 956.112 H0 7 3/4 Round 17.20 2.50mm D, Swp, Reduced CP 4 & 11 70/120/20 364
ETA 956.112 H3 7 3/4 Round 17.20 2.50mm D, Swp, High CP 4 & 11 70/120/20 364
ETA 956.114 7 3/4 Round 17.20 2.50mm D, Swp 4 & 11 70/120/20 364 Eta 956.112
ETA 956.124 7 3/4 Round 17.20 3.00mm DD, Swp 5 & 11 70/120/20 364 NO SUB
ETA 956.412-2H 8 3/4 Round 19.40 2.50mm D, 2-Hand, H0 4 &11 70/120 362
ETA 956.412 8 3/4 Round 19.40 2.50mm D, Swp 4 &11 70/120/20 362
ETA 956.412 H3 8 3/4 Round 19.40 2.50mm High CP 4 &11 70/120/20 362
ETA 956.414 8 3/4 Round 19.40 2.50mm D, Swp 4 &11 70/120/20 362 Eta 956.412
ETA 976.001 5 1/2 x 6 3/4 13.0 x 15.15 1.95mm 7 & 11 1/2 55/100 321
ETA 976.001 H0 5 1/2 x 6 3/4 13.0 x 15.15 1.95mm Reduced CP 7 & 11 1/2 55/100 321
ETA 976.001 H3 5 1/2 x 6 3/4 13.0 x 15.15 1.95mm High CP 7 & 11 1/2 55/100 321
ETA 980.106 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm Swp 6 1/2 & 11 1/2 70/120/20 317
ETA 980.108 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm Swp 6 1/2 & 11 1/2 70/120/20 317
ETA 980.153 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm Small Second (Ldy) 6 1/2 & 11 1/2 70/120/20 317
ETA 980.153 H3 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm Sm Sec (Ldy), High CP 6 1/2 & 11 1/2 70/120/20 317
ETA 980.163 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm Small Second (Gnt) 6 1/2 & 11 1/2 70/120/20 317
ETA 980.163 H2 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm Sm Sec (Gnt), Raised CP 6 1/2 & 11 1/2 70/120/20 317
ETA 980.163 H3 5 1/2 x 6 3/4 13.0 x 15.15 2.20mm Sm Sec (Gnt), High CP 6 1/2 & 11 1/2 70/120/20 317
ETA 988.333 9 3/4 x 11 1/2 22.0 x 25.60 3.25mm Ana dig (Alm, Tmr, chr) 2 1/2 & 8 1/2 55/100 370
ETA E01.001 4 7/8 Round 11.00 2.50mm 5 jew, Gold plated 6 1/2 & 11 1/2 55/100 335
ETA E01.001 H3 4 7/8 Round 11.00 2.50mm 5 jew, High CP 6 1/2 & 11 1/2 55/100 335
ETA E01.701 4 7/8 Round 11.00 2.50mm 5 jew, Electronic Set 2 1/2 & 8 1/2 55/100 335
ETA E03.001 5 1/2 x 6 3/4 13.0 x 15.15 1.35mm 6 1/2 & 11 1/2 55/100 335
ETA E20.321 13 1/4 Round 29.80 6.90mm Perpetual Cal, D, Chr CR2320
ETA E61.031 8 1/4 Round 18.60 1.95mm D, (ETA 256.031 Repl) 5 & 11 70/120 315
ETA E61.041 8 1/4 Round 18.60 1.95mm D, (ETA 256.041 Repl) 5 & 11 70/120 315
ETA E61.111 8 1/4 Round 18.60 1.95mm D Swp, (256.111 Repl) 5 & 11 70/120/20 315
ETA E63.041 10 1/2 Round 23.30 1.95mm D, (ETA 255.441 Repl) 2 & 8 70/120 373
ETA E63.111 10 1/2 Round 23.30 1.95mm D Swp, (255.412 Repl) 2 & 8 70/120/20 373
ETA E64.031 10 1/2 Round 25.60 1.95mm 2 & 8 70/120 373
ETA E64.041 10 1/2 Round 25.60 1.95mm D 2 & 8 70/120 373
ETA E64.111 11 1/2 Round 25.60 1.95mm D Swp, (255.112 Repl) 2 & 8 70/120/20 373
ETA F03.101 7 3/4 Round 17.20 2.50mm Swp, 3 jew 4 & 11 70/120/20 364
ETA F03.111-2H 7 3/4 Round 17.20 2.50mm D, 2-Hand, 3 jew 4 & 11 70/120 364
ETA F03.111 7 3/4 Round 17.20 2.50mm D, Swp, 3 jew 4 & 11 70/120/20 364
ETA F03.111 D6 7 3/4 Round 17.20 2.50mm D@6, Swp, 3 jew 4 & 11 70/120/20 364
ETA F03.111 H3 7 3/4 Round 17.20 2.50mm D, Swp, High CP 4 & 11 70/120/20 364
ETA F04.11A 8 3/4 Round 19.40 2.50mm D, Swp 4 & 11 70/120/20 364
ETA F04.111 8 3/4 Round 19.40 2.50mm D, Swp, 3 jew 4 & 11 70/120/20 364
ETA F04.111 D6 8 3/4 Round 19.40 2.50mm D@6, Swp, 3 jew 4 & 11 70/120/20 364
ETA F04.111 H3 8 3/4 Round 19.40 2.50mm D, Swp, High CP 4 & 11 70/120/20 364
ETA F05.111-2H 10 1/2 Round 23.30 2.50mm D, 2-Hand, 3 jew 2 & 8 70/120 371
ETA F05.111 10 1/2 Round 23.30 2.50mm D, Swp, 3 jew 2 & 8 70/120/20 371
ETA F05.111 D6 10 1/2 Round 23.30 2.50mm D@6, Swp, 3 jew 2 & 8 70/120/20 371
ETA F05.111 H3 10 1/2 Round 23.30 2.50mm D, Swp, High CP 2 & 8 70/120/20 371
ETA F06.11A 11 1/2 Round 25.60 2.50mm D, Swp 2 1/2 & 8 1/2 70/120/20 371 Eta F06.111
ETA F06.101 11 1/2 Round 25.60 2.50mm Swp, 3 jew 2 & 8 70/120/20 371
ETA F06.111-2H 11 1/2 Round 25.60 2.50mm D, 2-Hand, 3 jew 2 & 8 70/120 371
ETA F06.111 11 1/2 Round 25.60 2.50mm D, Swp, 3 jew 2 1/2 & 8 1/2 70/120/20 371
ETA F06.111 D6 11 1/2 Round 25.60 2.50mm D@6, Swp, 3 jew 2 & 8 70/120/20 371
ETA F06.111 H3 11 1/2 Round 25.60 2.50mm D, Swp, High CP 2 & 8 70/120/20 371
ETA F06.161 11 1/2 Round 25.60 3.60mm D, Swp, BIG Date 2 & 8 70/120/20 371
ETA F07.111 13 1/4 Round 29.80 2.50mm D, Swp, 3 jew 2 1/2 & 8 1/2 70/120/20 371
ETA G10.21A 13 1/4 Round 29.80 5.12mm Chr, D@4, Hanging 5 & 10 1/2 90/150/25 394
ETA G10.211 D3 13 1/4 Round 29.80 5.12mm D@3, "Tissot / Invicta" 5 & 10 1/2 90/150/30/20 394
ETA G10.211 D4 13 1/4 Round 29.80 5.12mm D@4, Angled/Hanging 5 & 10 1/2 90/150/30/20 394
ETA G10.211 D6 13 1/4 Round 29.80 5.12mm D@6, Chr (6H/3-Eye) 5 & 10 1/2 90/150/25 394 G10.212 D6
ETA G10.212 D3 AB 13 1/4 Round 29.80 5.12mm D@3, "Tissot / Invicta" 5 & 10 1/2 90/150/30/20 394
ETA G10.212 D4 AB 13 1/4 Round 29.80 5.12mm D@4, Angled/Hanging 5 & 10 1/2 90/150/30/20 394
ETA G10.212 D6 AB 13 1/4 Round 29.80 5.12mm D@6, Chr (6H/3-Eye) 5 & 10 1/2 90/150/30/20 394 G10.212 D6
ETA G10.212 D4H 13 1/4 Round 29.80 5.12mm D@4, Straight/Horz. 5 & 10 1/2 90/150/30/20 394
ETA G10.71A (N4) 13 1/4 Round 29.80 5.62mm D@4, Angled-Inside 5 & 10 1/2 90/150/25/20 394 G10.712 D4
ETA G10.71A (N3) 13 1/4 Round 29.80 5.62mm D@4, Straight/Horz. 5 & 10 1/2 90/150/25/20 394 G10.712 D4H
ETA G10.711 D3 13 1/4 Round 29.80 5.62mm D@3, "Tag Heuer" 5 & 10 1/2 90/150/25/20 394
ETA G10.711 D3.5 13 1/4 Round 29.80 5.62mm D@3:30, "Tag Heuer" 5 & 10 1/2 90/150/25/20 394 NO SUB
ETA G10.711 D4.5 13 1/4 Round 29.80 5.62mm D@4:30, "Tag Heuer" 5 & 10 1/2 90/150/25/20 394
ETA G10.711 D4H 13 1/4 Round 29.80 5.62mm D@4, Straight/Horz. 5 & 10 1/2 90/150/25/20 394 G10.712 D4H
ETA G10.712 D4 CB 13 1/4 Round 29.80 5.62mm D@4, Angled-Inside 5 & 10 1/2 90/150/25/20 394
ETA G10.712 D4H CB 13 1/4 Round 29.80 5.62mm D@4, Straight/Horz. 5 & 10 1/2 90/150/25/20 394
ETA G10.962 D4 BE 13 1/4 Round 29.80 5.15mm D@4, Angled/Hanging 5 & 10 90/150/25/20 394
ETA G15.21A 13 1/4 Round 29.80 5.25mm Chr, D@4, Hanging 5 & 11 90/150/30/20 394
ETA G15.211 D3 13 1/4 Round 29.80 5.25mm D@3, Angled/Hanging 5 & 11 90/150/30/20 394 G15.212 D3
ETA G15.211 D4 13 1/4 Round 29.80 5.25mm D@4, Angled/Hanging 5 & 11 90/150/30/20 394 G15.212 D4
ETA G15.211 D6 13 1/4 Round 29.80 5.25mm D@6, Chr (6H/3-Eye) 5 & 11 90/150/30/20 394 G15.212 D6
ETA G15.212 D3 AB 13 1/4 Round 29.80 5.25mm D@3 5 & 11 90/150/30/20 394
ETA G15.212 D4 AB 13 1/4 Round 29.80 5.25mm D@4, Angled/Hanging 5 & 11 90/150/30/20 394
ETA G15.212 D6 AB 13 1/4 Round 29.80 5.25mm D@6, Chr (6H/3-Eye) 5 & 11 90/150/30/20 394
ETA G15.261 D4 10 1/2 Round 23.30 5.25mm D@4, retro Chr, Hanging 5 & 11 90/150/30/20 394 NO SUB
FE 2031 10 1/2 Round 23.30 2.65mm D, Swp 2 1/2 & 8 1/2 70/120/20 371 Ronda 705
FE 2131 11 1/2 Round 25.60 2.65mm D, Swp 2 1/2 & 8 1/2 70/120/20 371
FE 5120 5 1/2 x 6 3/4 13.0 x 15.15 2.60mm 3 1/2 & 8 70/120 379 Ronda 751
FE 5130 5 1/2 x 6 3/4 13.0 x 15.15 2.60mm Swp 3 1/2 & 8 70/120/20 379 Ronda 753
FE 5820 5 1/2 x 6 3/4 13.0 x 15.15 3.26mm 4 & 8 55/100 379 Ronda 751B
FE 6120 6 3/4 x 8 15.15 x 17.80 2.60mm 3 1/2 & 8 1/2 70/120 364 Ronda 762
FE 6130 6 3/4 x 8 15.15 x 17.80 2.60mm Swp 3 1/2 & 8 1/2 70/120/20 364 Ronda 763
FE 6220 6 3/4 x 8 15.15 x 17.80 3.05mm 7 & 11 1/2 70/120 377 MIY 2025
FE 6230 6 3/4 x 8 15.15 x 17.80 3.05mm Swp 7 & 11 1/2 70/120/20 377 MIY 2035
FE 6320 6 3/4 x 8 15.15 x 17.80 3.60mm 3 1/2 & 8 1/2 60/100 397 Ronda 762
FE 7021 8 3/4 Round 19.40 3.10mm D, Swp 4 1/2 & 11 1/2 70/120/20 362 Ronda 585
FE 7029 8 3/4 Round 19.40 3.58mm D, Mn, Swp 4 & 11 70/120/20 362
FE 7121 10 1/2 Round 23.30 3.10mm D, Swp 2 1/2 & 8 1/2 70/120/20 371 Ronda 505
FE 7129 10 1/2 Round 23.30 3.40mm D, Mn, Swp 1 1/2 & 7 1/2 70/120/20 371 NO SUB
FE 7221 11 1/2 Round 25.60 3.10mm D, Swp 2 1/2 & 8 1/2 70/120/20 371 Ronda 515
FE 7931 10 1/2 Round 23.30 3.70mm D, Swp 2 1/2 & 8 1/2 70/120/20 371 NO SUB
FE 10031 10 1/2 Round 23.30 2.60mm D, Swp 2 & 8 70/120/20/18 371 Ronda 705
FE 11539 11 1/2 Round 25.60 3.61mm Chr, Swp 2 1/2 & 8 1/2 70/120/20/18 371 NO SUB
SII AL 20 6 3/4 x 8 15.15 x 17.80 2.99mm 1 & 5 65/110 397
SII AL 21 6 3/4 x 8 15.15 x 17.80 2.99mm Swp 1 & 5 65/110/20 397
SII NH 35 12 Round 27.40 5.32mm D,Swp 1 1/2 & 7 1/2 90/150/20 Mech
SII NH 36 12 Round 27.40 5.32mm DD,Swp 1 1/2 & 7 1/2 90/150/20 Mech
SII PC 10 5 1/2 x 6 3/4 13.0 x 15.15 3.15mm 5 1/2 & 11 1/2 70/120 319
SII PC 11 5 1/2 x 6 3/4 13.0 x 15.15 3.15mm Swp 5 1/2 & 11 1/2 70/120/20 319
SII PC 20 6 3/4 x 8 15.15 x 17.80 3.15mm 7 & 11 70/120 377
SII PC 21 6 3/4 x 8 15.15 x 17.80 3.15mm Swp 5&11, 7&11 70/120/17 377
SII PC 21 H3 6 3/4 x 8 15.15 x 17.80 3.15mm Swp, High Can Pin 5&11, 7&11 70/120/17 377
SII PC 21 H4 6 3/4 x 8 15.15 x 17.80 3.15mm Swp, Very High CP 5&11, 7&11 70/120/17 377
SII PC 22 6 3/4 x 8 15.15 x 17.80 4.15mm D, Swp 5&11, 7&11 70/120/17 377
SII PC 22 D6 6 3/4 x 8 15.15 x 17.80 4.15mm D@6, Swp 5&11, 7&11 70/120/17 377
SII PC 23 6 3/4 x 8 15.15 x 17.80 4.15mm DD, Swp 5&11, 7&11 70/120/17 377
SII PC 29 6 3/4 x 8 15.15 x 17.80 4.15mm Mn, Swp 7 & 11 1/2 70/120/17 377
SII PC 32 10 1/2 23.30 4.15mm D, Swp 5 & 11 70/120/17 377
SII PC 32 D6 10 1/2 23.30 4.15mm D@6, Swp 5 & 11 70/120/17 377
SII PC 33 10 1/2 23.30 4.15mm DD, Swp 5 & 11 70/120/17 377
SII PC 39 10 1/2 23.30 4.15mm Sn, Mn, Swp 4 & 10 70/120/17 377 NO SUB
SII V 041 10 1/4 x 11 22.5 x 25.00 3.90mm Ana Dig (Gold Dial) 2 & 8 N/A 396 NO SUB
SII V 400/20 5 1/2 x 6 3/4 13.0 x 15.15 2.10mm 5 1/2 & 12 1/2 45/90 317
SII V 400/30 HC 5 1/2 x 6 3/4 13.0 x 15.15 2.10mm High CP 5 1/2 & 12 1/2 45/90 317
SII V 401 5 1/2 x 6 3/4 13.0 x 15.15 2.30mm Swp 5 1/2 & 12 1/2 65/110/18 317 Seiko 1N01
SII V 500 6 3/4 x 8 15.15 x 17.80 2.99mm 1 & 5 65/110 377 Y 120
SII V 501/10 6 3/4 x 8 15.15 x 17.80 2.99mm Swp 1 & 5 65/110/20 377 Y 121
SII V 515 6 3/4 x 8 15.15 x 17.80 2.99mm Swp 1 & 5 65/110/20 377 NO SUB
SII V 532/11 SC 10 1/2 23.30 3.22mm Short CP 4 & 10 65/110/20 395
SII V 532/20 10 1/2 23.30 3.22mm D, Swp 4 & 10 65/110/20 395 NO SUB
SII V 532/21 10 1/2 23.30 3.22mm D@6, Swp, Blk Dial 4 & 10 65/110/20 395
SII V 532/22 10 1/2 23.30 3.22mm D@6, Swp 4 & 10 65/110/20 395
SII V 533 10 1/2 23.30 3.74mm DD, Swp 4 & 10 65/110/20 395 VX 33
SII V 535 10 1/2 23.30 3.74mm Sn, Mn, Swp 4 & 10 65/110/20 395 NO SUB
SII V 536 10 1/2 23.30 3.74mm D, Swp 4 & 10 65/110/20 395 NO SUB
SII V 537 10 1/2 23.30 2.90mm Swp 4 & 10 65/110/20 395 VX 32
SII V 53L 10 1/2 23.30 3.74mm D, Swp 4 & 10 65/110/20 371 NO SUB
SII V 544 11 1/2 25.60 3.57mm Day@12, D, Swp 1 1/2 & 7 1/2 65/110/20 395 VX 44
SII V 700 - 7N00 6 3/4 x 8 15.15 x 17.80 2.10mm 6 & 12 1/2 65/110 364 Seiko 7N00
SII V 701 - 7N01 6 3/4 x 8 15.15 x 17.80 2.10mm Swp 6 & 12 1/2 65/110/20 364 Seiko 7N01
SII V 722 10 1/2 23.30 2.60mm D, Swp 4 1/2 & 10 1/2 65/110/20 371 VX 32
SII V 729 10 1/2 23.30 2.60mm D 4 1/2 & 10 1/2 65/110 371 VX 29
SII V 732 - 7N32 10 1/2 23.30 2.90mm D, Swp 4 1/2 & 10 1/2 65/110/20 371 Seiko 7N32
SII V 733 - 7N33 10 1/2 23.30 2.90mm DD, Swp 4 1/2 & 10 1/2 65/110/20 371 Seiko 7N33
SII V 742 - 7N42 11 1/2 25.60 2.90mm D, Swp 4 1/2 & 10 1/2 65/110/20 371 Seiko 7N42
SII V 743 - 7N43 11 1/2 25.60 2.90mm DD, Swp 4 1/2 & 10 1/2 65/110/20 371 Seiko 7N43
SII V 782 - 7N82 7 3/4 17.20 2.60mm D, Swp 5 1/2 & 12 45/90/20 364 Seiko 7N82
SII V 783 - 7N83 7 3/4 17.20 2.90mm DD, Swp 5 1/2 & 12 45/90/20 364 Seiko 7N83
SII V 785 7 3/4 17.20 2.60mm D, Swp 5 1/2 & 12 45/90/20 364 Seiko 7N85
SII V 789 - 7N89 7 3/4 17.20 2.60mm D 5 1/2 & 12 45/90/20 364 Seiko 7N89
SII V 800 6 3/4 x 8 15.15 x 17.80 1.90mm 2 1/2 & 7 65/110 321 NO SUB
SII V 801 7 3/4 17.20 2.60mm Swp 2 1/2 & 7 65/110/20 321 NO SUB
SII V 810/20 5 1/2 x 6 3/4 13.0 x 15.15 3.00mm 6 & 11 1/2 65/110 319
SII V 811/20 5 1/2 x 6 3/4 13.0 x 15.15 3.00mm Swp 6 & 11 1/2 65/110/20 319
SII V 827/20 7 1/2 x 8 1/4 16.8 x 18.5 3.60mm D, Swp 1&7, 6 & 11 1/2 65/110/20 377
SII V 828 7 1/2 x 8 1/4 16.8 x 18.5 4.20mm DD, Swp 1&7, 6 & 11 1/2 65/110/20 377 PC 23
SII V 829/30 7 1/2 x 8 1/4 16.8 x 18.5 4.20mm Sn, Mn, Swp 1&7, 6 & 11 1/2 65/110/20 377
SII VB 20 3 3/4 x 6 3/4 9.0 x 15.15 2.20mm 1 & 6 1/2 45/90 379
SII VC 00 4 3/4 x 6 1/2 10.5 x 14.45 2.38mm 6 & 11 1/2 65/110 379
SII VC 01 4 3/4 x 6 1/2 10.5 x 14.45 2.38mm Swp 6 & 11 1/2 65/110/20 379
SII VC 10 5 1/2 x 6 3/4 13.0 x 15.15 2.38mm 5 1/2 & 12 1/2 65/110 379
SII VC 11 5 1/2 x 6 3/4 13.0 x 15.15 2.38mm Swp 5 1/2 & 12 1/2 65/110/20 379
SII VD 31 13 1/2 Round 30.60 3.97mm Swp, Chr (6H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 50 12 3/4 Round 29.50 4.57mm Swp, Chr (6H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 51 12 3/4 Round 29.50 4.57mm Swp, Chr (5H/2-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 52 12 3/4 Round 29.50 4.57mm Swp, Chr (5H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 53 12 3/4 Round 29.50 4.57mm D, Swp, Chr (6H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 53 D6 12 3/4 Round 29.50 4.57mm Swp, Chr (5H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 54 12 3/4 Round 29.50 3.97mm Swp, Chr (6H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 55 12 3/4 Round 29.50 3.97mm Swp, Chr (6H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 56 12 3/4 Round 29.50 3.97mm Swp, Chr (7H/4-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 57 12 3/4 Round 29.50 4.57mm D, Swp, Chr (6H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371
SII VD 59 12 3/4 Round 29.50 4.57mm SnMn, Swp, Chr (6H/3E) 1 1/2 & 6 1/2 65/110/20 371
SII VD 67 12 3/4 Round 29.50 4.57mm D, Swp, Chr (6H/3-Eye) 1 1/2 & 6 1/2 65/110/20 371 NO SUB
SII VD 74 10 1/2 Round 23.30 3.45mm Multi func (6H/4-Eye) 4 1/2 & 10 70/120/20 377
SII VD 75 10 1/2 Round 23.30 3.45mm Multi func (6H/4-Eye) 4 1/2 & 10 70/120/20 377
SII VD 76 10 1/2 Round 23.30 3.45mm Multi func (6H/3-Eye) 4 1/2 & 10 70/120/20 377
SII VD 77 10 1/2 Round 23.30 3.45mm Multi func (4H/2-Eye) 4 1/2 & 10 70/120/20 377
SII VD 78 10 1/2 Round 23.30 3.45mm Multi func (3H/1-Eye) 4 1/2 & 10 70/120/20 377
SII VD 79 10 1/2 Round 23.30 3.45mm Multi func (4H/2-Eye) 4 1/2 & 10 65/110/20 371
SII VD 84 10 1/2 Round 23.30 3.45mm Multi func (6H/3-Eye) 4 1/2 & 10 65/110/20 371
SII VD 85 10 1/2 Round 23.30 3.45mm Multi func (5H/2-Eye) 4 1/2 & 10 65/110/20 371
SII VD 86 10 1/2 Round 23.30 3.45mm Multi func (5H/2-Eye) 4 1/2 & 10 65/110/20 371
SII VD 87 10 1/2 Round 23.30 3.45mm Multi func (5H/2-Eye) 4 1/2 & 10 65/110/20 371
SII VE 00 6 3/4 x 8 15.15 x 17.80 2.39mm 8 1/2 & 12 1/2 65/110/18 321 NO SUB
SII VH 63 10 1/2 Round 23.30 3.45mm Multi func (6H/3-Eye) 5 & 11 65/110/20 371
SII VH 68 10 1/2 Round 23.30 3.45mm Multi func (6H/3-Eye) 5 & 11 65/110/20 371
SII VJ 12 8 3/4 19.40 2.71mm D, Swp 1&7, 4&11 70/120/17 364
SII VJ 12 D6 8 3/4 19.40 2.71mm D@6, Swp 1&7, 4&11 70/120/17 364
SII VJ 14 8 3/4 19.40 2.71mm D 1&7, 4&11 70/120 364
SII VJ 20 6 3/4 x 8 15.15 x 17.80 2.28mm 5 1/2 & 11 1/2 70/120 364
SII VJ 21 6 3/4 x 8 15.15 x 17.80 2.28mm Swp 5 1/2 & 11 1/2 70/120/18 364
SII VJ 22 6 3/4 x 8 15.15 x 17.80 2.71mm D, Swp 5 1/2 & 11 1/2 70/120/18 364
SII VJ 22 D6 6 3/4 x 8 15.15 x 17.80 2.71mm D@6, Swp 5 1/2 & 11 1/2 70/120/18 364
SII VJ 23 6 3/4 x 8 15.15 x 17.80 2.71mm DD, Swp 5 1/2 & 11 1/2 70/120/18 364
SII VJ 24 6 3/4 x 8 15.15 x 17.80 2.71mm D 5 1/2 & 11 1/2 70/120 364
SII VJ 32 10 1/2 23.30 2.71mm D, Swp 5 1/2 & 11 1/2 70/120/18 364
SII VJ 32 D6 10 1/2 23.30 2.71mm D@6, Swp 5 1/2 & 11 1/2 70/120/18 364
SII VJ 33 10 1/2 23.30 2.94mm DD, Swp 5 1/2 & 11 1/2 70/120/18 364
SII VJ 34 10 1/2 23.30 2.71mm D 1 & 7 70/120 364
SII VJ 42 11 1/2 25.60 2.71mm D, Swp 1 & 7 70/120/20 364
SII VJ 42 D6 11 1/2 25.60 2.71mm D@6, Swp 1 & 7 70/120/20 364
SII VJ 43 11 1/2 25.60 2.94mm DD, Swp 1 & 7 70/120/20 364
SII VJ 45 11 1/2 25.60 2.94mm Day@12, D@6 1 & 7 70/120/20 364
SII VJ 52 12 1/2 12.50 2.71mm D, Swp 1 & 7 70/120/20 364
SII VJ 53 12 1/2 12.50 2.94mm DD, Swp 1 & 7 70/120/20 364
SII VJ 55 12 1/2 12.50 2.94mm Day@12, D@6 1 & 7 70/120/20 364
SII VJ 76 11 1/2 25.60 3.50mm BIG D@12, Swp 1 & 7 70/120/20 364
SII VK 61 13 1/2 13.50 5.10mm D, Swp, Chr (5H/2-Eye) 70/120/20 364
SII VK 63 13 1/2 13.50 5.10mm D, Swp, Chr (6H/3-Eye) 70/120/20 364
SII VK 64 13 1/2 13.50 5.10mm D, Swp, Chr (5H/2-Eye) 70/120/20 364
SII VK 67 13 1/2 13.50 5.10mm D, Swp, Chr (6H/3-Eye) 70/120/20 364
SII VK 73 13 1/2 13.50 5.90mm D, Swp, Chr (6H/3-Eye) 70/120/20 364
SII VK 83 13 1/2 13.50 5.10mm D, Swp, Chr (6H/3-Eye) 70/120/20 364
SII VP 31 10 1/2 23.30 3.22mm Swp 7 & 11 65/110/20 399 NO SUB
SII VP 36 10 1/2 23.30 3.74mm D, Swp 7 & 11 65/110/20 395
SII VP 39 10 1/2 23.30 3.74mm DD, Swp 7 & 11 65/110/20 395 NO SUB
EPSON VR 32 13 1/2 13.50 3.97mm D, Swp, Chr (6H/3-Eye) 1 1/2 & 7 1/2 65/110/20/20 371
EPSON VR 34 13 1/2 13.50 3.97mm D, Swp, Chr (6H/3-Eye) 1 1/2 & 7 1/2 65/110/20/20 371
EPSON VX 00 4 3/4 x 6 1/2 10.8 x 14.4 2.09mm 6 1/2 & 11 1/2 45/90 317
EPSON VX 01 4 3/4 x 6 1/2 10.8 x 14.4 2.39mm Swp 6 1/2 & 11 1/2 65/110/18 317
EPSON VX 07 6 3/4 x 8 15.15 x 17.80 2.99mm Remote Swp (Gnt) 6 1/2 & 12 1/2 65/110/20 364 NO SUB
EPSON VX 08 6 3/4 x 8 15.15 x 17.80 2.99mm Remote Swp (Ldy) 6 1/2 & 12 1/2 65/110/20 364 NO SUB
EPSON VX 10 5 1/2 x 6 3/4 13.0 x 15.15 2.19mm 6 & 11 45/90 317
EPSON VX 11 8 3/4 19.40 2.56mm Swp 7 & 11 65/110/20 315
EPSON VX 12 8 3/4 19.40 2.56mm D, Swp 7 & 11 65/110/20 315
EPSON VX 12 D6 8 3/4 19.40 2.56mm D@6, Swp 7 & 11 65/110/20 315
EPSON VX 18 8 3/4 19.40 2.56mm D, Mn, Swp 7 & 11 65/110 315
EPSON VX 18 D6 8 3/4 19.40 2.56mm D, Mn, Swp 7 & 11 65/110 315
EPSON VX 32 10 1/2 23.30 2.56mm D, Swp 1 & 7 65/110/20 373
EPSON VX 32 D6 10 1/2 23.30 2.56mm D@6, Swp 1 & 7 65/110/20 373
EPSON VX 33 10 1/2 23.30 2.92mm DD, Swp 1 & 7 65/110/20 373
EPSON VX 36 10 1/2 23.30 3.05mm DD, Swp 1 & 7 65/110/20 373
EPSON VX 37 10 1/2 23.30 3.05mm D, Swp 1 & 7 65/110/20 373
EPSON VX 38 10 1/2 23.30 3.35mm D, Mn, Swp 1 & 7 65/110/20 373 NO SUB
EPSON VX 39 10 1/2 23.30 3.05mm D, Mn, Swp 1 & 7 65/110/20 373 NO SUB
EPSON VX 3F 10 1/2 23.30 3.05mm Multi func (7H/4-Eye) 1 & 7 65/110/20 373
EPSON VX 3G 10 1/2 23.30 3.05mm DY, D, Mth, Mn, 4-eye 1 & 7 65/110/20 373
EPSON VX 3H 10 1/2 23.30 3.05mm DY, D, Sn/Mn, 3-eye 1 & 7 65/110/20 373
EPSON VX 3J 10 1/2 23.30 3.05mm DY, D, 24hr, 3-eye 1 & 7 65/110/20 373
EPSON VX 3K 10 1/2 23.30 2.62mm D 1 & 7 65/110 373
EPSON VX 3L 10 1/2 23.30 3.05mm DY, D, 24hr, 3-eye 1 & 7 65/110/20 373
EPSON VX 3N 10 1/2 23.30 3.05mm DY, D, 24hr, 3-eye 1 & 7 65/110/20 373
EPSON VX 3P 10 1/2 23.30 3.05mm DY, D, 2-eye 1 & 7 65/110/20 373
EPSON VX 3R 10 1/2 23.30 3.05mm DY, D, 24hr, 3-eye 1 & 7 65/110/20 373
EPSON VX 3S 10 1/2 23.30 3.05mm DY, D, 24hr, 3-eye 1 & 7 65/110/20 373
EPSON VX 3T 10 1/2 23.30 3.05mm DY, D, 24hr, 3-eye 1 & 7 65/110/20 373
EPSON VX 42 11 1/2 25.60 2.56mm D, Swp 1 & 7 65/110/20 373
EPSON VX 42 D6 11 1/2 25.60 2.56mm D@6, Swp 1 & 7 65/110/20 373
EPSON VX 43 11 1/2 25.60 2.92mm DD, Swp 2 & 8 65/110/20 373
EPSON VX 44 11 1/2 25.60 3.57mm Day@12, D, Swp 2 & 8 65/110/20 395
EPSON VX 50 6 3/4 x 8 15.15 x 17.80 2.14mm 1 & 5 65/110 321
EPSON VX 51 6 3/4 x 8 15.15 x 17.80 2.14mm Swp 1 & 5 65/110/20 321
EPSON VX 62 13 1/2 13.50 3.63mm D, Swp 1 & 7 65/110/20 395
EPSON VX 7J 12 3/4 12.75 3.99mm DY, D, 24hr, 3-eye 6 1/2 & 12 1/2 65/110/20 395
EPSON VX 7N 12 3/4 12.75 3.99mm DY, D, 24hr, 3-eye 6 1/2 & 12 1/2 65/110/20 395
EPSON VX 7P 12 3/4 12.75 3.99mm DY, D, 2-eye 6 1/2 & 12 1/2 65/110/20 395
EPSON VX 7R 12 3/4 12.75 3.99mm D, 24hr, 2-eye 6 1/2 & 12 1/2 65/110/20 395
EPSON VX 82 7 3/4 17.20 2.75mm D, Swp 5 1/2 & 12 1/2 65/110/20 364
EPSON VX 82 D6 7 3/4 17.20 2.75mm D@6, Swp 5 1/2 & 12 1/2 65/110/20 364
EPSON VX 83 7 3/4 17.20 3.11mm DD, Swp 5 1/2 & 12 1/2 65/110/20 364
EPSON VX 89 7 3/4 17.20 2.75mm D 5 1/2 & 12 1/2 65/110 364
EPSON VX 89 D6 7 3/4 17.20 2.75mm D@6 5 1/2 & 12 1/2 65/110 364
EPSON VX 9J 12 3/4 12.75 3.99mm DY, D, 24hr, 3-eye, pshr 6 1/2 & 12 1/2 65/110/20 395
EPSON VX 9N 12 3/4 12.75 3.99mm DY, D, 24hr, 3-eye, pshr 6 1/2 & 12 1/2 65/110/20 395
EPSON VX 9P 12 3/4 12.75 3.99mm DY, D, 2-eye, pusher 6 1/2 & 12 1/2 65/110/20 395
EPSON VX 9R 12 3/4 12.75 3.99mm D, 24hr, 2-eye, pusher 6 1/2 & 12 1/2 65/110/20 395
EPSON Y 120 6 3/4 x 8 15.15 x 17.80 2.99mm 1 & 5 65/110 377
EPSON Y 121 6 3/4 x 8 15.15 x 17.80 2.99mm Swp 1 & 5 65/110/20 377
EPSON Y 121 H2 6 3/4 x 8 15.15 x 17.80 2.99mm Swp, Raised CP 1 & 5 65/110/20 377
EPSON Y 121 H3 6 3/4 x 8 15.15 x 17.80 2.99mm Swp, High Can Pin 1 & 5 65/110/20 377
EPSON Y 121 H4 6 3/4 x 8 15.15 x 17.80 2.99mm Swp, Very High CP 1 & 5 65/110/20 377
EPSON Y 520 4 1/4 Round 10.40 3.20mm Swp, Very High CP 8 & 11 45/90 317 NO SUB
EPSON YL 50 4 7/8 Round 9.0 x 9.50 2.78mm 2 & 11 45/90 335 NO SUB
EPSON YL 60 4 3/4 x 5 1/2 10.0 x 12 .50 2.09mm 2 & 6 1/2 45/90 337 Seiko 1F20
EPSON YL 61 4 3/4 x 5 1/2 10.0 x 12 .50 2.09mm Swp 2 & 6 1/2 65/100/18 337 VX 01
EPSON YM 52 12 12.00 3.70mm D, Chr (6H/3-Eye) 1 1/2 & 7 1/2 65/110/20 399 NO SUB
EPSON YM 55 12 12.00 3.70mm D, Chr (6H/3-Eye) 1 1/2 & 7 1/2 65/110/20 399 NO SUB
EPSON YM 62 12 12.00 3.70mm D, Chr (6H/3-Eye) 1 1/2 & 7 1/2 65/110/20 395
EPSON YM 92 12 12.00 3.70mm D, Chr (6H/3-Eye) 1 1/2 & 7 1/2 65/110/20 395
EPSON YR 37 10 1/2 23.30 3.84mm Alarm, Swp 1 1/2 & 7 1/2 65/110/20 395 NO SUB
EPSON YR 67 10 1/2 23.30 3.05mm Swp 1 1/2 & 7 1/2 65/110/20 395 NO SUB
EPSON YT 57 12 Round 27.00 4.89mm D, Swp, Auto (AGS) 3 1/2 & 10 65/110/20 Auto NO SUB
EPSON YT 58 12 Round 27.00 4.89mm DD, Swp, Auto (AGS) 3 1/2 & 10 65/110/20 Auto NO SUB
EPSON YT 62 12 Round 27.00 4.30mm D, Swp, Auto (AGS) 3 1/2 & 7, 5&11 65/110/20 Auto NO SUB
EPSON YT 63 12 Round 27.00 4.30mm DD, Swp, Auto (AGS) 3 1/2 & 7, 5&11 65/110/20 Auto NO SUB
ISA 125/130 5 1/2 x 7 3/4 13.0 x 17.20 1.40mm Swiss, Gold plated 3 1/2 & 12 50/90 341 NO SUB
ISA 127/130 7 3/4 Round 17.20 1.40mm Swiss, Gold plated 3 1/2 & 9 1/2 50/90 341
ISA 130/103 10 1/2 Round 23.30 1.90mm D, Swp, Swiss 2 & 8 70/120/18 315 Isa 230/103
ISA 138/101 8 3/4 Round 19.40 1.60mm Swp, Swiss 4 1/2 & 11 70/120/20 315 Isa 238/101
ISA 138/103 8 3/4 Round 19.40 1.60mm D, Swp, Swiss 4 1/2 & 11 70/120/20 315 Isa 238/103
ISA 220/130 10 1/2 Round 23.30 1.60mm 2-Hand, Swiss 2 & 8 70/120 315 NO SUB
ISA 220/1332 10 1/2 Round 23.30 1.90mm D, Swiss 2 & 8 70/120 315 NO SUB
ISA 222/130 7 3/4 Round 17.20 1.60mm 2-Hand, Swiss 2 & 8 70/120 321 NO SUB
ISA 222/1332 7 3/4 Round 17.20 1.90mm D, Swiss 2 & 8 70/120 321
ISA 230/103 10 1/2 Round 23.30 1.90mm D, Swp, Swiss 2 & 8 70/120/18 315 NO SUB
ISA 238/103 8 3/4 Round 19.40 1.60mm D, Swp, Swiss 4 1/2 & 11 70/120/20 315 NO SUB
ISA 257/130 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm 5 1/2 & 12 1/2 55/100 321 Ronda 751E
ISA 267/130 6 3/4 x 8 15.15 x 17.80 2.50mm 5 1/2 & 12 1/2 55/100 364
ISA 307/101 10 1/2 Round 23.30 3.20mm Swp 3 1/2 & 10 1/2 70/120/20 371 NO SUB
ISA 307/103 10 1/2 Round 23.30 3.25mm D, Swp 3 1/2 & 10 1/2 70/120/20 371 Isa 2330/103
ISA 307/104 10 1/2 Round 23.30 3.60mm DD, Swp 3 1/2 & 10 1/2 70/120/20 371 NO SUB
ISA 317/101 11 1/2 Round 25.60 3.20mm Swp 3 1/2 & 10 1/2 70/120/20 371 NO SUB
ISA 317/103 11 1/2 Round 25.60 3.20mm D, Swp 3 1/2 & 10 1/2 70/120/20 371 Isa 2331/103
ISA 317/104 11 1/2 Round 25.60 3.60mm DD, Swp 3 1/2 & 10 1/2 70/120/20 371 NO SUB
ISA 331/103 11 1/2 Round 25.60 2.50mm D, Swp 2 1/2 & 8 1/2 70/120/20 371
ISA 338/103 8 3/4 Round 19.40 2.50mm D, Swp, Swiss 4 1/2 & 11 70/120/20 362
ISA 369/101 6 3/4 x 8 15.15 x 17.80 2.75mm Swp 1 1/2 & 5 1/2 70/120/20 377 Isa 608/1010
ISA 389/101 8 3/4 Round 19.40 2.50mm Swp 4 & 11 70/120/20 397 Ronda 785
ISA 389/103 8 3/4 Round 19.40 3.25mm D, Swp 4 & 11 70/120/20 397 Ronda 785
ISA 389/104 8 3/4 Round 19.40 3.60mm DD, Swp 4 & 11 70/120/20 397
ISA 389/108 8 3/4 Round 19.40 3.60mm D, Mn, Swp 4 & 11 70/120/20 397
ISA 608/1010 6 3/4 x 8 15.15 x 17.80 3.10mm Swp 1 1/2 & 5 1/2 70/120/20 377 Ronda 763
ISA 638/101 6 3/4 x 8 15.15 x 17.80 3.10mm Swp 1 1/2 & 5 1/2 70/120/20 377 Isa 608/1010
ISA 1198/101 11 1/2 Round 25.60 3.25mm Swp 2 1/2 & 8 90/150/20 395 NO SUB
ISA 1198/103 11 1/2 Round 25.60 3.70mm D, Swp 2 1/2 & 8 90/150/20 395 NO SUB
ISA 1198/104 11 1/2 Round 25.60 4.00mm DD, Swp 2 1/2 & 8 90/150/20 395 NO SUB
ISA 1198/105 13 Round 28.50 4.00mm Day@12, D, Swp 2 1/2 & 8 90/150/20 395 NO SUB
ISA 1198/108 11 1/2 Round 25.60 4.00mm D, Sn, Mn, Swp 2 1/2 & 8 90/150/20 395 NO SUB
ISA 1198/42-4 11 1/2 Round 25.60 4.00mm DD, Swp, Stem@4 2 1/2 & 8 90/150/20 395 NO SUB
ISA 2330/103 10 1/2 Round 23.30 2.95mm D, Swp 3 1/2 & 10 1/2 70/120/20 371
ISA 2331/103 11 1/2 Round 25.60 2.95mm D, Swp 3 1/2 & 10 1/2 70/120/20 371 NO SUB
ISA 2334/1035 14 3/4 Round 33.30 3.00mm D, Swp 3 1/2 & 10 1/2 70/120/20 371 NO SUB
ISA 8161/201 11 1/2 Round 25.60 3.70mm Chr, D@6, 2-eye 2 1/2 & 8 1/2 90/150/20/18 395 Isa 8171/201
ISA 8161/202 11 1/2 Round 25.60 3.70mm Chr, D@4, 3-eye 2 1/2 & 8 1/2 90/150/20/18 395 Isa 8171/202
ISA 8161/204 11 1/2 Round 25.60 3.70mm Chr, D@4, Mn, 2-eye 2 1/2 & 8 1/2 90/150/20/18 395 Isa 8171/204
ISA 8162/220 11 1/2 Round 25.60 4.20mm Chr, D@4, 3-eye 2 1/2 & 8 1/2 90/150/20/18 399 Isa 8172/220
ISA 8171/201 11 1/2 Round 25.60 3.70mm Chr, D@6, 2-eye 2 1/2 & 8 1/2 90/150/20/18 395 NO SUB
ISA 8171/202 11 1/2 Round 25.60 3.70mm Chr, D@4, 3-eye 2 1/2 & 8 1/2 90/150/20/18 395 NO SUB
ISA 8171/204 11 1/2 Round 25.60 3.70mm Chr, D@4, Mn, 2-eye 2 1/2 & 8 1/2 90/150/20/18 395 NO SUB
ISA 8172/220 11 1/2 Round 25.60 4.20mm Chr, D@4, 3-eye 2 1/2 & 8 1/2 90/150/20/18 399 NO SUB
ISA 8172/220 D6 11 1/2 Round 25.60 4.20mm Chr, D@6, 3-eye 2 1/2 & 8 1/2 90/150/20/18 399 NO SUB
ISA 8174/201 11 1/2 Round 25.60 4.60mm Chr, D@6, 2-eye 2 1/2 & 8 1/2 90/150/20 399 $49.95
ISA 8176/1990 11 1/2 Round 25.60 3.70mm Chr, 1-eye 2 1/2 & 8 1/2 90/150/20 395 NO SUB
ISA 8176/2050 11 1/2 Round 25.60 3.70mm Chr, 1-eye 2 1/2 & 8 1/2 90/150/20 395 NO SUB
ISA 8272 11 1/2 Round 25.60 4.60mm Chr, D@6, 2-eye, Tide 2 1/2 & 8 1/2 90/150/20 399 NO SUB
ISA 8272 SW 11 1/2 Round 25.60 4.60mm Chr, D@6, 2-eye, Tide 2 1/2 & 8 1/2 90/150/20 399
ISA 9231/1890 10 1/2 Round 23.30 4.13mm Multi func (5H/2-Eye) 2 & 8 70/120/20/18 371
ISA 9232/1920 10 1/2 Round 23.30 4.13mm Multi func (6H/3-Eye) 2 & 8 70/120/20/18 371
ISA 9238/1960 10 1/2 Round 23.30 4.13mm Multi func (5H/2-Eye) 2 & 8 70/120/20/18 371
ISA 9238/1970 10 1/2 Round 23.30 4.13mm Multi func (6H/3-Eye) 2 & 8 70/120/20/18 371 NO SUB
ISA K63/101 6 3/4 x 8 15.15 x 17.80 2.95mm Swp 5 1/2 & 12 1/2 70/120/20 377 Isa 608/1010
ISA K63/302 Sw 13 Round 28.50 3.20mm Swp 6 1/2 & 12 1/2 70/120/20 376 NO SUB
ISA K83/103 8 3/4 Round 19.40 2.95mm D, Swp 4 & 11 1/2 70/120/18 362 Ronda 785
MIYOTA 1L02 6 3/4 x 8 15.15 x 17.80 2.94mm DD, Swp 7 & 11 1/2 70/120/17 364
MIYOTA 1L12 6 3/4 x 8 15.15 x 17.80 2.71mm D, Swp 7 & 11 1/2 70/120/17 364
MIYOTA 1L12 D6 6 3/4 x 8 15.15 x 17.80 2.71mm D@6, Swp 7 & 11 1/2 70/120/17 364
MIYOTA 1L15 6 3/4 x 8 15.15 x 17.80 2.71mm D 7 & 11 1/2 70/120 364
MIYOTA 1L22 6 3/4 x 8 15.15 x 17.80 2.15mm D 7 & 11 1/2 70/120 364
MIYOTA 1L26 6 3/4 x 8 15.15 x 17.80 2.15mm High CP 7 & 11 1/2 70/120 364
MIYOTA 1L32 6 3/4 x 8 15.15 x 17.80 2.28mm Swp 7 & 11 1/2 70/120/17 364
MIYOTA 1L36 6 3/4 x 8 15.15 x 17.80 2.15mm Swp, High CP 7 & 11 1/2 70/120/20 364
MIYOTA 1L40 6 3/4 x 8 15.15 x 17.80 2.94mm Remote Swp (Ldy) 7 & 11 70/120/17 364
MIYOTA 1L45 6 3/4 x 8 15.15 x 17.80 2.94mm Remote Swp (Gnt) 7 & 11 70/120/17 364
MIYOTA 1L50 6 3/4 x 8 15.15 x 17.80 2.94mm BIG Date, Swp 6 1/2 & 11 1/2 70/120/17 364
MIYOTA 1M02 10 1/2 Round 23.30 2.94mm DD, Swp 5 & 11 70/120/17 364
MIYOTA 1M12 10 1/2 Round 23.30 2.71mm D, Swp 5 & 11 70/120/17 364
MIYOTA 1M12 D6 10 1/2 Round 23.30 2.71mm D@6, Swp 5 & 11 70/120/17 364
MIYOTA 1M15 6 3/4 x 8 15.15 x 17.80 2.71mm D 5 & 11 70/120 364
MIYOTA 1M50 10 1/2 Round 23.30 2.71mm BIG Date, Swp 5 & 11 70/120/17 364
MIYOTA 1N12 8 3/4 Round 19.40 2.58mm D, Swp 2 & 8 70/120/17 321
MIYOTA 1N12 D6 8 3/4 Round 19.40 2.58mm D@6, Swp 2 & 8 70/120/17 321
MIYOTA 1S02 11 1/2 Round 25.60 3.07mm DD, Swp 5 & 11 70/120/17 364
MIYOTA 1S13 11 1/2 Round 25.60 2.71mm D, Swp 5 & 11 70/120/17 364
MIYOTA 1S13 D6 11 1/2 Round 25.60 2.71mm D@6, Swp 5 & 11 70/120/17 364
MIYOTA 2005 6 3/4 x 8 15.15 x 17.80 3.80mm DD, Swp 7 & 11 70/120/17 377
MIYOTA 2015 6 3/4 x 8 15.15 x 17.80 3.80mm D, Swp 7 & 11 1/2 70/120/17 377
MIYOTA 2015 D6 6 3/4 x 8 15.15 x 17.80 3.80mm D@6, Swp 7 & 11 1/2 70/120/17 377
MIYOTA 2025 6 3/4 x 8 15.15 x 17.80 2.89mm 7 & 11 1/2 70/120 377
MIYOTA 2026 6 3/4 x 8 15.15 x 17.80 2.89mm High CP 7 & 11 1/2 70/120/17 377
MIYOTA 2033 6 3/4 x 8 15.15 x 17.80 2.89mm Swp, Extra High CP 7 & 11 1/2 70/120/17 377
MIYOTA 2034 6 3/4 x 8 15.15 x 17.80 2.89mm High Torque Swp 7 & 11 1/2 70/120/17 377
MIYOTA 2035 6 3/4 x 8 15.15 x 17.80 2.89mm Swp 7 & 11 1/2 70/120/17 377
MIYOTA 2036 6 3/4 x 8 15.15 x 17.80 2.89mm Swp, Raised CP 7 & 11 1/2 70/120/17 377
MIYOTA 2039 6 3/4 x 8 15.15 x 17.80 2.89mm Swp, High CP 7 & 11 1/2 70/120/17 377
MIYOTA 203A 6 3/4 x 8 15.15 x 17.80 2.89mm Swp, Super High CP 7 & 11 1/2 70/120/17 377
MIYOTA 2105 10 1/2 x 8 1/2 23.30 3.80mm DD, Swp 5 & 11 70/120/17 377
MIYOTA 2115 10 1/2 x 8 1/2 23.30 3.80mm D, Swp 5 & 11 70/120/17 377
MIYOTA 2115 D6 10 1/2 x 8 1/2 23.30 3.80mm D@6, Swp 5 & 11 70/120/17 377
MIYOTA 2305 11 1/2 Round 25.60 4.15mm DD, Swp 4 & 10 70/120/17 377
MIYOTA 2315 11 1/2 Round 25.60 4.15mm D, Swp 4 & 10 70/120/17 377
MIYOTA 2315 D6 11 1/2 Round 25.60 4.15mm D@6, Swp 4 & 10 70/120/17 377
MIYOTA 2350 11 1/2 Round 25.60 4.15mm D@12, D, Swp 4 & 10 70/120/17 377
MIYOTA 2353 11 1/2 Round 25.60 4.15mm BIG Date, Swp 4 & 10 70/120/17 377
MIYOTA 2405 13 1/2 Round 13.50 4.35mm DD, Swp 2 1/2 & 8 1/2 70/120/17 377
MIYOTA 2415 13 1/2 Round 13.50 4.35mm D, Swp 2 1/2 & 8 1/2 70/120/17 377
MIYOTA 2417 13 1/2 Round 13.50 4.35mm D, Swp, High CP 2 1/2 & 8 1/2 70/120/17 377
MIYOTA 2453 13 1/2 Round 13.50 4.35mm BIG Date, Swp 2 1/2 & 8 1/2 70/120/17 377
MIYOTA 2S60 10 1/2 23.30 3.99mm D, Swp 5 & 11 70/120/17 CR2012
MIYOTA 2S65 10 1/2 23.30 4.22mm DD, Swp 5 & 11 70/120/17 CR2012
MIYOTA 3S10 - 3510 13 1/2 Round 30.60 4.20mm Chr, D@6, Swp 5 & 11 70/120/18 399 NO SUB
MIYOTA 4S20 4 Round 4 Round 2.95mm 5 1/2 & 11 1/2 70/120 335
MIYOTA 4T13 6 3/4 x 8 15.15 x 17.80 2.33mm D, Swp 5 1/2 & 12 1/2 70/120/17 321 MIY 9T13
MIYOTA 4T23 6 3/4 x 8 15.15 x 17.80 1.90mm 5 1/2 & 12 1/2 70/120 321 MIY 9T22
MIYOTA 4T33 6 3/4 x 8 15.15 x 17.80 1.90mm Swp 5 1/2 & 12 1/2 70/120/17 321 MIY 9T33
MIYOTA 4T43 6 3/4 x 8 15.15 x 17.80 2.40mm Remote Swp (Ldy) 5 1/2 & 12 1/2 70/120/17 321 NO SUB
MIYOTA 4T48 6 3/4 x 8 15.15 x 17.80 2.40mm Remote Swp (Gnt) 5 1/2 & 12 1/2 70/120/17 321 NO SUB
MIYOTA 4T74 6 3/4 x 8 15.15 x 17.80 2.33mm D 5 1/2 & 12 1/2 70/120 321 NO SUB
MIYOTA 4U13/td> 10 1/2 Round 23.30 2.33mm D, Swp 5 1/2 & 12 1/2 70/120/17 315 MIY 9U13
MIYOTA 4U74 10 1/2 Round 23.30 2.33mm D 5 1/2 & 12 1/2 70/120 315 NO SUB
MIYOTA 5R21 3 3/4 x 6 9.0 x 13.50 1.90mm 4 & 11 1/2 40/80 337
MIYOTA 5R22 3 3/4 x 6 9.0 x 13.50 1.90mm High Can Pin 4 & 11 1/2 40/80 337
MIYOTA 5R32 3 3/4 x 6 9.0 x 13.50 2.00mm Swp 4 & 11 1/2 65/100/17 337
MIYOTA 5S00 10 1/2 Round 23.30 3.45mm DD, Swp 5 & 11 70/120/17 371 MIY 6M02
MIYOTA 5Y20 5 1/2 x 6 3/4 13.0 x 15.15 2.54mm 6 1/2 & 11 1/2 65/100 379
MIYOTA 5Y26 5 1/2 x 6 3/4 13.0 x 15.15 2.54mm High Can Pin 6 1/2 & 11 1/2 65/100 379
MIYOTA 5Y30 5 1/2 x 6 3/4 13.0 x 15.15 2.54mm Swp 6 1/2 & 11 1/2 65/100/17 379
MIYOTA 5Y36 5 1/2 x 6 3/4 13.0 x 15.15 2.54mm Swp, High Can Pin 6 1/2 & 11 1/2 65/100/17 379
MIYOTA 6L02 6 3/4 x 8 15.15 x 17.80 2.55mm DD, Swp 7 & 11 1/2 70/120/17 364 MIY 1L02
MIYOTA 6L12 6 3/4 x 8 15.15 x 17.80 3.10mm D, Swp 7 & 11 1/2 70/120/17 364 MIY 1L12
MIYOTA 6L12 D6 6 3/4 x 8 15.15 x 17.80 3.10mm D@6, Swp 7 & 11 1/2 70/120/17 364 MIY 1L12 D6
MIYOTA 6L22 6 3/4 x 8 15.15 x 17.80 2.44mm 7 & 11 1/2 70/120 364 MIY 1L22
MIYOTA 6L32 6 3/4 x 8 15.15 x 17.80 2.44mm Swp 7 & 11 1/2 70/120/17 364 MIY 1L32
MIYOTA 6L40 6 3/4 x 8 15.15 x 17.80 3.20mm Remote Swp (Ldy) 7 & 11 70/120/17 364 MIY 1L40
MIYOTA 6L45 6 3/4 x 8 15.15 x 17.80 3.20mm Remote Swp (Gnt) 7 & 11 70/120/17 364 MIY 1L45
MIYOTA 6L71 10 1/2 Round 23.30 3.55mm Chr, Alm, Swp 5 & 11 70/120/17 364 NO SUB
MIYOTA 6L85 6 3/4 x 8 15.15 x 17.80 3.30mm D, Mn, Swp 6 1/2 & 11 1/2 70/120/17 364 NO SUB
MIYOTA 6L90 6 3/4 x 8 15.15 x 17.80 3.30mm Sn, Mn, Swp 6 1/2 & 11 1/2 70/120/17 364 NO SUB
MIYOTA 6L95 6 3/4 x 8 15.15 x 17.80 3.30mm Sn, Mn , D, Swp 6 1/2 & 11 1/2 70/120/17 364 NO SUB
MIYOTA 6M02 10 1/2 Round 23.30 3.30mm DD, Swp 4 & 10 1/2 70/120/17 364 MIY 1M02
MIYOTA 6M12 10 1/2 Round 23.30 3.30mm D, Swp 1&7, 4 & 10 1/2 70/120/17 364 MIY 1M12
MIYOTA 6M12 D6 10 1/2 Round 23.30 3.30mm D@6, Swp 1&7, 4 & 10 1/2 70/120/17 364 MIY 1M12 D6
MIYOTA 6M17 10 1/2 Round 23.30 3.30mm 24hr, Swp 1&7, 4 & 10 1/2 70/120/17 364 NO SUB
MIYOTA 6M50 11 1/2 Round 25.60 3.50mm Day@12, D, Swp 1&8, 5&11 70/120/17 364 NO SUB
MIYOTA 6M53 11 1/2 Round 25.60 3.30mm BIG Date, Swp 2 1/2 & 8 1/2 70/120/17 364 NO SUB
MIYOTA 6M55 13 1/2 Round 30.60 3.85mm Day@12, D, Swp 2 1/2 & 8 1/2 70/120/17 364 NO SUB
MIYOTA 6M85 10 1/2 Round 23.30 3.30mm D, Mn, Swp 5&11, 1 1/2 & 6 1/2 70/120/17 364 NO SUB
MIYOTA 6M90 10 1/2 Round 23.30 3.30mm Sn, Mn, Swp 5&11, 1 1/2&6 1/2 70/120/17 364 NO SUB
MIYOTA 6M95 10 1/2 Round 23.30 3.30mm D, Sn, Mn, Swp 5&11, 1 1/2&6 1/2 70/120/17 364 NO SUB
MIYOTA 6N00 13 Round 28.50 4.30mm EL, DD, Swp 1 1/2 & 9 1/2 70/120/17 364 NO SUB
MIYOTA 6N10 13 Round 28.50 4.30mm EL, D, Swp 1 1/2 & 9 1/2 70/120/17 364 NO SUB
MIYOTA 6N30 13 Round 28.50 3.55mm EL, Swp 1 1/2 & 9 1/2 70/120/17 364 NO SUB
MIYOTA 6P00 10 1/2 Round 23.30 3.45mm DD, Mth, Mn, 3-eye 4 1/2 & 10 1/2 70/120/17 364
MIYOTA 6P05 10 1/2 Round 23.30 3.45mm DD, Mth, 3-eye 5 & 11 70/120/17 364
MIYOTA 6P09 10 1/2 Round 23.30 3.45mm DD, Mth, 24hr, 4-eye 5 & 11 70/120/17 364
MIYOTA 6P20 10 1/2 Round 23.30 3.45mm DD, Mn, 2-eye 5 & 11 70/120/17 364
MIYOTA 6P23 10 1/2 Round 23.30 3.45mm DD, Mn, 2-eye 5 & 11 70/120/17 364
MIYOTA 6P25 10 1/2 Round 23.30 3.45mm DD, Mn, 2-eye 5 & 11 70/120/17 364
MIYOTA 6P27 10 1/2 Round 23.30 3.45mm DD, 24hr, 3-eye 5 & 11 70/120/17 364
MIYOTA 6P29 10 1/2 Round 23.30 3.45mm DD, 24hr, 3-eye 5 & 11 70/120/17 364
MIYOTA 6P50 10 1/2 Round 23.30 3.45mm D, Mn, 2-eye 5 & 11 70/120/17 364 NO SUB
MIYOTA 6P55 10 1/2 Round 23.30 3.45mm DD, Mth, 2-eye 4 1/2 & 10 1/2 70/120/17 364 NO SUB
MIYOTA 6P80 10 1/2 Round 23.30 3.85mm D, Mth, Mn, 2-disc 5 & 11 70/120/17 364
MIYOTA 6P89 10 1/2 Round 23.30 3.85mm DD, 24hr, 3-eye 5 & 11 70/120/17 364
MIYOTA 6R29 13 Round 28.50 4.25mm EL, Wk, D, 24hr, 3-eye 2 & 8 70/120/17 399 NO SUB
MIYOTA 6S10 15 Round 34.40 4.90mm Chr, D, Swp 1 & 7 70/120/18/24 377
MIYOTA 6S20 15 Round 34.40 4.90mm Chr, D, Swp 1 & 7 70/120/18/24 377
MIYOTA 6S21 15 Round 34.40 4.90mm Chr, D, Swp 1 & 7 70/120/18/24 377
MIYOTA 6S30 15 Round 34.40 4.90mm Chr, D, Swp 1 & 7 70/120/18/24 377
MIYOTA 6T51 8 3/4 Round 19.40 5.58mm DD, Swp, 21 Jew 5 1/2 & 10 1/2 100/165/17 Auto
MIYOTA 6W60 11 1/2 Round 25.60 3.70mm 24hr, Min, Sec, 3-eye 1 1/2 & 6 1/2 70/120/17 399 NO SUB
MIYOTA 8205 11 1/2 Round 25.60 5.67mm DD, Swp, 21 Jew 5 1/2 & 10 1/2 100/165/17 Auto
MIYOTA 8215 11 1/2 Round 25.60 5.67mm D, Swp, 21 Jew 5 1/2 & 10 1/2 100/165/17 Auto
MIYOTA 9T13 6 3/4 x 8 15.15 x 17.80 2.33mm D, Swp 7 & 11 1/2 70/120/18 321
MIYOTA 9T13 D6 6 3/4 x 8 15.15 x 17.80 2.33mm D@6, Swp 7 & 11 1/2 70/120/18 321
MIYOTA 9T15 6 3/4 x 8 15.15 x 17.80 2.33mm D 7 & 11 1/2 70/120 321
MIYOTA 9T22 6 3/4 x 8 15.15 x 17.80 1.90mm 7 & 11 1/2 70/120 321
MIYOTA 9T33 6 3/4 x 8 15.15 x 17.80 1.90mm Swp 7 & 11 1/2 70/120/18 321
MIYOTA 9U13 10 1/2 Round 23.30 2.33mm D, Swp 5 & 11 70/120/18 373
MIYOTA 9U13 D6 10 1/2 Round 23.30 2.33mm D@6, Swp 5 & 11 70/120/18 373
MIYOTA 9U15 10 1/2 Round 23.30 2.33mm D 5 & 11 70/120 373
MIYOTA FS00 10 1/2 Round 23.30 4.13mm Chr, D@4, 6-hand 6 1/2 & 11 70/120/17 377
MIYOTA FS01 10 1/2 Round 23.30 4.28mm Chr, D@4, 6-hand 6 1/2 & 11 70/120/17 377
MIYOTA FS10 10 1/2 Round 23.30 5.10mm Chr, D@4, 6-hand 6 1/2 & 11 70/120/17 377
MIYOTA FS11 10 1/2 Round 23.30 5.25mm Chr, D@3, Sq Case, 6H 6 1/2 & 11 70/120/17/25 377
MIYOTA FS20 10 1/2 Round 23.30 5.10mm Chr, D@4, hang 6H 6 1/2 & 11 70/120/17/25 377
MIYOTA FS21 10 1/2 Round 23.30 5.25mm Chr, D@4, hang 6H 6 1/2 & 11 70/120/17/25 377
MIYOTA FS23 10 1/2 Round 23.30 5.10mm Chr, D@4, hang 6H 6 1/2 & 11 70/120/17/25 377
MIYOTA FS60 10 1/2 Round 23.30 5.10mm Chr, D@4, hang 6H 6 1/2 & 11 70/120/17 377
MIYOTA GL00 7 1/4 x 8 1/4 16.15 x 18.15 2.94mm DD, Swp 6 1/2 & 11 1/2 70/120/17 364
MIYOTA GL10 7 1/4 x 8 1/4 16.15 x 18.15 2.71mm D, Swp 6 1/2 & 11 1/2 70/120/17 364
MIYOTA GL10 D6 7 1/4 x 8 1/4 16.15 x 18.15 2.71mm D@6, Swp 6 1/2 & 11 1/2 70/120/17 364
MIYOTA GL15 7 1/4 x 8 1/4 16.15 x 18.15 2.71mm D 6 1/2 & 11 1/2 70/120/17 364
MIYOTA GL20 6 3/4 x 8 15.15 x 17.80 2.28mm 6 1/2 & 11 1/2 70/120 364
MIYOTA GL30 6 3/4 x 8 15.15 x 17.80 2.28mm Swp 6 1/2 & 11 1/2 70/120/17 364
MIYOTA GL36 6 3/4 x 8 15.15 x 17.80 2.28mm Swp, High CP 6 1/2 & 11 1/2 70/120/17 364
MIYOTA GM00 10 1/2 Round 23.30 2.94mm DD, Swp 4 1/2 & 10 1/2 70/120/17 364
MIYOTA GM10 10 1/2 Round 23.30 2.71mm D, Swp 4 1/2 & 10 1/2 70/120/17 364
MIYOTA GM10 D6 10 1/2 Round 23.30 2.71mm D@6, Swp 4 1/2 & 10 1/2 70/120/17 364
MIYOTA GN10 8 3/4 Round 19.40 2.71mm D, Swp 4 1/2 & 10 1/2 70/120/17 364
MIYOTA GP00 12 Round 27.00 4.40mm BIG D@12,DTZ,Swp 4 & 11 70/120/17 371
MIYOTA GP01 12 Round 27.00 4.40mm BIG D@3,DTZ,Swp 4 & 11 70/120/17 371
MIYOTA GP03 12 Round 27.00 4.40mm BIG D@3,24Hr,Swp 4 & 11 70/120/17 371
MIYOTA GP10 12 Round 27.00 4.40mm BIG D@12, Sm Swp 4 & 11 70/120/17 371
MIYOTA GP11 12 Round 27.00 4.40mm BIG D@3, Sm Swp 4 & 11 70/120/17 371
MIYOTA GP30 12 Round 27.00 4.40mm BIG D@12, Swp 4 & 11 70/120/17 371
MIYOTA JP11 12 1/2 Round 28.40 4.30mm D, Swp, (5H/2-Eye) 1 & 7 70/120/17 364
MIYOTA JP15 12 1/2 Round 28.40 4.30mm D, Swp, (6H/3-Eye) 1 & 7 70/120/17 364
MIYOTA JP25 12 1/2 Round 28.40 4.30mm D@4:30, Swp, (6H/3E) 1 & 7 70/120/17 364
MIYOTA JR00 12 1/2 Round 28.40 4.18mm Day@9:00 (6H/3-Eye) 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JR20 12 1/2 Round 28.40 4.18mm Day@3:00 (6H/3-Eye) 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JS00 12 1/2 Round 28.40 4.18mm Swp, Stw (6H/3-Eye) 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JS05 12 1/2 Round 28.40 4.30mm Swp, Stw (6H/3-Eye) 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JS15 12 1/2 Round 28.40 4.30mm D, Swp, Stw (6H/3E) 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JS16 12 1/2 Round 28.40 4.30mm D, Swp, (6H/3E), HCP 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JS20 12 1/2 Round 28.40 4.18mm Swp, Stw (6H/3-Eye) 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JS25 12 1/2 Round 28.40 4.18mm D@4:30 (6H/3-Eye) 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JS25 D6 12 1/2 Round 28.40 4.18mm D@6 (6H/3-Eye) 5 1/2 & 10 1/2 70/120/17 364
MIYOTA JS26 12 1/2 Round 28.40 4.18mm D@4:30 (6H/3E), HCP 5 1/2 & 10 1/2 70/120/17 364
MIYOTA NM10 12 Round 27.00 4.25mm D,Swp, (Bulova P102) 5 1/2 & 10 1/2 70/120/17 CR2016
MIYOTA OS00 13 1/2 Round 30.60 4.13mm Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17 399
MIYOTA OS10 13 1/2 Round 30.60 4.13mm D, Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17 399
MIYOTA OS11 13 1/2 Round 30.60 4.13mm D, Swp, Chr (5H/2-Eye) 2 1/2 & 9 1/2 70/120/17 399
MIYOTA OS20 13 1/2 Round 30.60 5.10mm D, Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17 395
MIYOTA OS21 13 1/2 Round 30.60 5.10mm D, Swp, Chr (5H/2-Eye) 2 1/2 & 9 1/2 70/120/17 395
MIYOTA OS25 13 1/2 Round 30.60 5.10mm D, Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17 395
MIYOTA OS30 13 1/2 Round 30.60 4.13mm Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17 399
MIYOTA OS60 13 1/2 Round 30.60 4.13mm D, Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17 399
MIYOTA OS62 13 1/2 Round 30.60 4.13mm D, Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17/26 399
MIYOTA OS80 13 1/2 Round 30.60 4.68mm D, Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17/26 399
MIYOTA OS90 13 1/2 Round 30.60 4.13mm D, Swp, Chr (6H/3-Eye) 2 1/2 & 9 1/2 70/120/17/24 399
MIYOTA OU30 9 1/2 Round 22.00 4.10mm EL, Swp N/A 70/120/17 364 NO SUB
MIYOTA T200 12 1/2 25.0 x 27.80 3.16mm Chr, Alm, Dig, Swp 3 1/2 & 11 1/2 70/120/17 399 NO SUB
MIYOTA T205 12 1/2 25.0 x 27.80 3.16mm Chr, Alm, Dig, Swp 3 1/2 & 11 1/2 70/120/17 399 NO SUB
MIYOTA T240 11 1/2 x 12 1/4 26.0 x 27.4 4.91mm Chr, Alm, Dig, Swp 3 1/2 & 11 1/2 70/120/17 399
MIYOTA T250 11 1/2 x 12 1/4 26.0 x 27.4 4.91mm Chr, Alm, Dig, Swp 3 & 9 70/120/17 399 NO SUB
MIYOTA T480 10 x 12 1/4 23.0 x 27.7 3.50mm Chr, Alm, Dig, Swp 3 1/2 & 11 1/2 70/120/17 399 NO SUB
MIYOTA T485 10 x 12 1/4 23.0 x 27.7 3.50mm Chr, Alm, Dig, Swp 3 1/2 & 11 1/2 70/120/17 399 NO SUB
RONDA 313 11 1/2 Round 25.60 3.00mm Swp 2 & 8 70/120/20 371 Ronda 513
RONDA 315 11 1/2 Round 25.60 3.00mm D, Swp 2 & 8 70/120/20 371 Ronda 515
RONDA 373 11 1/2 Round 25.60 3.75mm Swp 2 & 8 90/150/20 395 Ronda 513
RONDA 375 11 1/2 Round 25.60 3.75mm D, Swp 2 & 8 90/150/20 395 Isa 1198/103
RONDA 3975 11 1/2 Round 25.60 2.90mm D, Swp 2 1/2 & 8 1/2 60/110/20 371 NO SUB
RONDA 3977 11 1/2 Round 25.60 1.85mm DD, Swp 2 1/2 & 8 1/2 60/110/20 371 NO SUB
RONDA 502 10 1/2 Round 23.30 3.00mm 2 & 8 70/120 371
RONDA 502 H2 10 1/2 Round 23.30 3.00mm Raised CP 2 & 8 70/120 371
RONDA 503 10 1/2 Round 23.30 3.00mm Swp 2 & 8 70/120/20 371
RONDA 505 10 1/2 Round 23.30 3.00mm D, Swp 2 & 8 70/120/20 371
RONDA 505 D6 11 1/2 Round 25.60 3.00mm D@6, Swp 2 & 8 70/120/20 371
RONDA 505 H2 10 1/2 Round 23.30 3.00mm D, Swp, Raised CP 2 & 8 70/120/20 371
RONDA 505 H6 10 1/2 Round 23.30 3.00mm Aig.6, Tracer intchg 2 & 8 70/120/20 371
RONDA 505.24D 10 1/2 Round 23.30 3.00mm D, Swp, 24hr Dial 2 & 8 70/120/20 371
RONDA 505.24H 10 1/2 Round 23.30 3.00mm D, Swp, 24hr Hand 2 & 8 70/120/20 371
RONDA 507 10 1/2 Round 23.30 3.00mm DD, Swp 2 & 8 70/120/20 371
RONDA 509 10 1/2 Round 23.30 3.00mm BIG Date, Swp 2 & 8 70/120/20 371
RONDA 512 11 1/2 Round 25.60 3.00mm 2 & 8 70/120/20 371
RONDA 513 11 1/2 Round 25.60 3.00mm Swp 2 & 8 70/120/20 371
RONDA 515 11 1/2 Round 25.60 3.00mm D, Swp 2 & 8 70/120/20 371
RONDA 515 D6 11 1/2 Round 25.60 3.00mm D@6, Swp 2 & 8 70/120/20 371
RONDA 515 H2 11 1/2 Round 25.60 3.00mm D, Swp, Raised CP 2 & 8 70/120/20 371
RONDA 515 Sw 11 1/2 Round 25.60 3.00mm D, Swp, 1 Jew 2 & 8 70/120/20 371
RONDA 515 Sw H6 11 1/2 Round 25.60 3.00mm Aig.6, Luminox intchg 2 & 8 70/120/20 371
RONDA 515.24D 11 1/2 Round 25.60 3.00mm D, Swp, 24hr Dial 2 & 8 70/120/20 371
RONDA 515.24D BK 11 1/2 Round 25.60 3.00mm D, Swp, 24hr Black Dial 2 & 8 70/120/20 371
RONDA 515.24H 11 1/2 Round 25.60 3.00mm D, Swp, 24hr Hand 2 & 8 70/120/20 371
RONDA 515.24H H2 11 1/2 Round 25.60 3.00mm D,Swp,24hr. Raised CP 2 & 8 70/120/20 371
RONDA 517 11 1/2 Round 25.60 3.00mm DD, Swp 2 & 8 70/120/20 371
RONDA 517 H2 11 1/2 Round 25.60 3.00mm DD, Swp, Aig.2 2 & 8 70/120/20 371
RONDA 517 Sw H6 R 11 1/2 Round 25.60 3.00mm Aig.6,Luminox,Retro 2 & 8 70/120/20 371
RONDA 519 11 1/2 Round 25.60 3.00mm BIG Date, Swp 2 & 8 70/120/20 371
RONDA 582 8 3/4 Round 19.40 3.00mm 5 & 11 70/120 362
RONDA 582 H2 8 3/4 Round 19.40 3.00mm Raised CP 5 & 11 70/120 362
RONDA 582 H3 8 3/4 Round 19.40 3.00mm High CP 5 & 11 70/120 362
RONDA 582 Sw H3 8 3/4 Round 19.40 3.00mm 5J-Gold, High CP 5 & 11 70/120 362
RONDA 583 8 3/4 Round 19.40 3.00mm Swp 5 & 11 70/120/20 362
RONDA 583 H2 8 3/4 Round 19.40 3.00mm Swp, Raised CP 5 & 11 70/120/20 362
RONDA 585 8 3/4 Round 19.40 3.00mm D, Swp 5 & 11 70/120/20 362
RONDA 585 D6 8 3/4 Round 19.40 3.00mm D@6, Swp 5 & 11 70/120/20 362
RONDA 702 10 1/2 Round 23.30 2.50mm 2 & 8 70/120 371
RONDA 702 Sw 10 1/2 Round 23.30 2.50mm 5J-Swiss 2 & 8 70/120/20 371
RONDA 702 Sw H3 10 1/2 Round 23.30 2.50mm 5J-Swiss, Aig.3 2 & 8 70/120/20 371
RONDA 703 10 1/2 Round 23.30 2.50mm Swp 2 & 8 70/120/20 371
RONDA 703 Sw H4 10 1/2 Round 23.30 2.50mm Aig.4, Tiffany intchg 2 & 8 70/120/20 371
RONDA 704 10 1/2 Round 23.30 2.50mm D 2 & 8 70/120 371
RONDA 704 H2 10 1/2 Round 23.30 2.50mm D, Raised CP 2 & 8 70/120 371
RONDA 704 H3 10 1/2 Round 23.30 2.50mm D, High CP 2 & 8 70/120 371
RONDA 705 10 1/2 Round 23.30 2.50mm D, Swp 2 & 8 70/120/20 371
RONDA 705 D6 10 1/2 Round 23.30 2.50mm D@6, Swp 2 & 8 70/120/20 371
RONDA 705 H3 10 1/2 Round 23.30 2.50mm D, Swp, High CP 2 & 8 70/120/20 371
RONDA 705 H4 10 1/2 Round 23.30 2.50mm D, Swp, Very High CP 2 & 8 70/120/20 371
RONDA 705 H5 10 1/2 Round 23.30 2.50mm D, Swp, Super High CP 2 & 8 70/120/20 371
RONDA 705 Sw 10 1/2 Round 23.30 2.50mm D, Swp, 5J-Gold 2 & 8 70/120/20 371
RONDA 706.1 Gold 10 1/2 Round 23.30 3.00mm Chr, Mn, Swp, (5-H) 2 & 8 70/120/20 371
RONDA 706.1 Silv 10 1/2 Round 23.30 3.00mm Chr, Mn, Swp, (5-H) 2 & 8 70/120/20 371
RONDA 706.2 10 1/2 Round 23.30 3.00mm Chr, Swp, (5-Hand) 2 & 8 70/120/20 371
RONDA 706.3 10 1/2 Round 23.30 3.00mm Chr, Swp, (6-Hand) 2 & 8 70/120/20 371
RONDA 706.B Sw 10 1/2 Round 23.30 3.00mm Chr, Swp, (5-Hand) 2 & 8 70/120/20 371
RONDA 708 D6 10 1/2 Round 23.30 2.98mm D@6, Mn, Swp 2 & 8 70/120/20 371
RONDA 712 11 1/2 Round 25.60 2.55mm 2 & 8 70/120 371
RONDA 713 11 1/2 Round 25.60 2.55mm Swp 2 & 8 70/120/20 371
RONDA 713 Sw H4 11 1/2 Round 25.60 2.55mm Swp, Aig.4 2 & 8 70/120/20 371
RONDA 715 11 1/2 Round 25.60 2.55mm D, Swp 2 & 8 70/120/20 371
RONDA 715 D6 11 1/2 Round 25.60 2.55mm D@6, Swp 2 & 8 70/120/20 371
RONDA 715 H2 11 1/2 Round 25.60 2.55mm D, Swp, Raised CP 2 & 8 70/120/20 371
RONDA 715 H3 11 1/2 Round 25.60 2.55mm D, Swp, High CP 2 & 8 70/120/20 371
RONDA 715 H4 11 1/2 Round 25.60 2.55mm D, Swp, Very High CP 2 & 8 70/120/20 371
RONDA 715 H5 11 1/2 Round 25.60 2.55mm D, Swp, Super High CP 2 & 8 70/120/20 371
RONDA 715 Sw 11 1/2 Round 25.60 2.55mm D, Swp, 5J-Gold 2 & 8 70/120/20 371
RONDA 715 Sw D4 11 1/2 Round 25.60 2.55mm D@4, Swp, 5J-Gold 2 & 8 70/120/20 371
RONDA 715 Sw H2 11 1/2 Round 25.60 2.55mm D, Swp, Raised CP 2 & 8 70/120/20 371
RONDA 715 Sw H6 11 1/2 Round 25.60 2.55mm Aig.6, Luminox intchg 2 & 8 70/120/20 371
RONDA 715Li Sw 11 1/2 Round 25.60 4.60mm Lithium Battery 2 & 8 70/120/20 CR2016
RONDA 715Li Sw H6 11 1/2 Round 25.60 4.60mm Lithium, Aig.6, Luminox 2 & 8 70/120/20 CR2016
RONDA 726 12 Round 27.00 4.95mm Chr, Swp 2 & 8 70/120/20 371 NO SUB
RONDA 732 - 1032 3 3/4 x 6 9.0 x 13.50 1.95mm 2 3/4 & 8 40/80 317 Ron 1032
RONDA 732 - 1032 H3 3 3/4 x 6 9.0 x 13.50 1.95mm High CP 2 3/4 & 8 40/80 317 Ron 1032 H3
RONDA 751 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm 6 1/2 & 11 1/2 70/120 379
RONDA 751 H3 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm High CP 6 1/2 & 11 1/2 70/120 379
RONDA 751 Sw 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm 4J-Gold 6 1/2 & 11 1/2 70/120 379
RONDA 751B 5 1/2 x 6 3/4 13.0 x 15.15 3.60mm 4J-Gold w/Plate 6 1/2 & 11 1/2 55/100 379
RONDA 751E 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm 4J-Gold 6 1/2 & 11 1/2 55/100 379
RONDA 751E H3 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm 4J-Gold, High CP 6 1/2 & 11 1/2 55/100 379
RONDA 753 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm Swp 6 1/2 & 11 1/2 70/120/20 379
RONDA 753 H3 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm Swp, High CP 6 1/2 & 11 1/2 70/120/20 379
RONDA 753 Sw 5 1/2 x 6 3/4 13.0 x 15.15 2.50mm Swp, 4J-Gold 6 1/2 & 11 1/2 70/120/20 379
RONDA 762 6 3/4 x 8 15.15 x 17.80 2.50mm 3 1/2 & 8 1/2 70/120 364
RONDA 762 H2 6 3/4 x 8 15.15 x 17.80 2.50mm Raised CP 3 1/2 & 8 1/2 70/120 364
RONDA 762 H3 6 3/4 x 8 15.15 x 17.80 2.50mm High CP 3 1/2 & 8 1/2 70/120 364
RONDA 762 H4 6 3/4 x 8 15.15 x 17.80 2.50mm Very High CP 3 1/2 & 8 1/2 70/120 364
RONDA 762 H5 6 3/4 x 8 15.15 x 17.80 2.50mm Super High CP 3 1/2 & 8 1/2 70/120 364
RONDA 762 Sw 6 3/4 x 8 15.15 x 17.80 2.50mm 4J-Gold 3 1/2 & 8 1/2 70/120 364
RONDA 762 Sw H2 6 3/4 x 8 15.15 x 17.80 2.50mm Aig.2, Movado intchg 3 1/2 & 8 1/2 70/120 364
RONDA 763 6 3/4 x 8 15.15 x 17.80 2.50mm Swp 3 1/2 & 8 1/2 70/120/20 364
RONDA 763 H2 6 3/4 x 8 15.15 x 17.80 2.50mm Swp, Raised CP 3 1/2 & 8 1/2 70/120/20 364
RONDA 763 H3 6 3/4 x 8 15.15 x 17.80 2.50mm Swp, High CP 3 1/2 & 8 1/2 70/120/20 364
RONDA 763 H4 6 3/4 x 8 15.15 x 17.80 2.50mm Swp, Very High CP 3 1/2 & 8 1/2 70/120/20 364
RONDA 763 H5 6 3/4 x 8 15.15 x 17.80 2.50mm Swp, Super High CP 3 1/2 & 8 1/2 70/120/20 364
RONDA 763 Sw 6 3/4 x 8 15.15 x 17.80 2.50mm Swp, 5J-Gold 3 1/2 & 8 1/2 70/120/20 364
RONDA 772 H6 7 3/4 Round 17.20 2.50mm Super HCP; Movado 4 & 11 1/2 70/120 364
RONDA 772 7 3/4 Round 17.20 2.50mm 4 & 11 1/2 70/120 364
RONDA 773 7 3/4 Round 17.20 2.50mm Swp 4 & 11 1/2 70/120/20 364
RONDA 774 7 3/4 Round 17.20 2.50mm D 4 & 11 1/2 70/120 364
RONDA 774 Sw D6 7 3/4 Round 17.20 2.50mm D@6, Movado intchg 4 & 11 1/2 70/120 364
RONDA 775 7 3/4 Round 17.20 2.50mm D, Swp 4 & 11 1/2 70/120/20 364
RONDA 775 D6 7 3/4 Round 17.20 2.50mm D@6, Swp 4 & 11 1/2 70/120/20 364
RONDA 775 H3 7 3/4 Round 17.20 2.50mm D, Swp, High CP 4 & 11 1/2 70/120/20 364
RONDA 775 H5 7 3/4 Round 17.20 2.50mm D, Swp, Super High CP 4 & 11 1/2 70/120/20 364
RONDA 775 Sw 7 3/4 Round 17.20 2.50mm D, Swp, 5J-Gold 4 & 11 1/2 70/120/20 364
RONDA 782 8 3/4 Round 19.40 2.50mm 4 & 11 70/120 362
RONDA 783 8 3/4 Round 19.40 2.50mm Swp 4 & 11 70/120/20 362
RONDA 784 8 3/4 Round 19.40 2.50mm D 4 & 11 70/120 362
RONDA 784 Sw D6 8 3/4 Round 19.40 2.50mm D@6, Movado intchg 4 & 11 70/120 362
RONDA 785 8 3/4 Round 19.40 2.50mm D, Swp 4 & 11 70/120/20 362
RONDA 785 D6 8 3/4 Round 19.40 2.50mm D@6, Swp 4 & 11 70/120/20 362
RONDA 785 H3 8 3/4 Round 19.40 2.50mm D, Swp, High CP 4 & 11 70/120/20 362
RONDA 785 H6 8 3/4 Round 19.40 2.50mm D, Swp, Aig.6, Tracer 4 & 11 70/120/20 362
RONDA 785 Sw 8 3/4 Round 19.40 2.50mm D, Swp, 5J-Gold 4 & 11 70/120/20 362
RONDA 785 Sw D6 8 3/4 Round 19.40 2.50mm D@6, Swp, 5 jew 4 & 11 70/120/20 362
RONDA 788 D6 8 3/4 Round 19.40 2.98mm D@6, Mn, Swp 4 & 11 70/120/20 362
RONDA 788 Sw D6 8 3/4 Round 19.40 2.98mm D@6, Mn, Swp, 5J 4 & 11 70/120/20 362
RONDA 1005 10 1/2 Round 23.30 1.90mm D, Swp, (Eta 255.411) 2 & 8 70/120/20 341
RONDA 1006 10 1/2 Round 23.30 1.90mm D, (Eta 255.441) 2 & 8 70/120 341
RONDA 1009 10 1/2 Round 23.30 1.90mm D, Rmt Swp (Gnt) 2 & 8 70/120/20 341
RONDA 1015 11 1/2 Round 25.60 1.90mm D, Swp, (Eta 255.111) 2 1/2 & 8 1/2 70/120/20 341
RONDA 1016 11 1/2 Round 25.60 1.90mm D, (Eta 255.111) 2 1/2 & 8 1/2 70/120 341
RONDA 1019 11 1/2 Round 25.60 1.90mm D, Rmt Swp (Gnt) 2 1/2 & 8 1/2 70/120/20 341
RONDA 1032 3 3/4 x 6 9.0 x 13.50 1.95mm Aig.0 2 3/4 & 8 40/80 317
RONDA 1032 H1 3 3/4 x 6 9.0 x 13.50 1.95mm 2 3/4 & 8 40/80 317
RONDA 1032 H2 3 3/4 x 6 9.0 x 13.50 1.95mm Aig.2, Raised CP 2 3/4 & 8 40/80 317
RONDA 1032 H3 3 3/4 x 6 9.0 x 13.50 1.95mm Aig.3, High CP 2 3/4 & 8 40/80 317
RONDA 1032 Sw 3 3/4 x 6 9.0 x 13.50 1.95mm Aig.0,Swiss, 7J-Gold 2 3/4 & 8 40/80 317
RONDA 1032 Sw H1 3 3/4 x 6 9.0 x 13.50 1.95mm Aig.1,Swiss,7J-Gold 2 3/4 & 8 40/80 317
RONDA 1032 Sw H2 3 3/4 x 6 9.0 x 13.50 1.95mm Aig.2,Swiss,7J-Gold 2 3/4 & 8 40/80 317
RONDA 1032 Sw H3 3 3/4 x 6 9.0 x 13.50 1.95mm Aig.3,Swiss,7J-Gold 2 3/4 & 8 40/80 317
RONDA 1042 4 1/4 Round 10.40 2.90mm 5J-Silver, (Eta E01.001) 1 & 7 40/80 335
RONDA 1042 Sw 4 1/4 Round 10.40 2.90mm Swiss, 5J-Gold 1 & 7 40/80 335
RONDA 1042.z 4 1/4 Round 10.40 2.90mm Aig.6, Gucci/Fossil 1 & 7 40/80 335
RONDA 1062 6 3/4 x 8 15.15 x 17.80 1.90mm 5 1/2 & 11 1/2 70/120 321
RONDA 1062 Sw 6 3/4 x 8 15.15 x 17.80 1.90mm Swiss, 4J-Gold 5 1/2 & 11 1/2 70/120 321
RONDA 1063 6 3/4 x 8 15.15 x 17.80 1.90mm Swp 5 1/2 & 11 1/2 70/120/20 321
RONDA 1064 6 3/4 x 8 15.15 x 17.80 1.90mm Small Second (Ldy) 5 1/2 & 11 1/2 70/120/20 321
RONDA 1064 Sw 6 3/4 x 8 15.15 x 17.80 1.90mm Swiss, Sm Sec (Ldy) 5 1/2 & 11 1/2 70/120/20 321
RONDA 1069 6 3/4 x 8 15.15 x 17.80 1.90mm Small Second (Gnt) 5 1/2 & 11 1/2 70/120/20 321
RONDA 1069 Sw 6 3/4 x 8 15.15 x 17.80 1.90mm Swiss, Sm Sec (Gnt) 5 1/2 & 11 1/2 70/120/20 321
RONDA 3520.D Sw 12 1/2 Round 28.40 4.90mm Chr, BIG D@12, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 3522 Sw 12 1/2 Round 28.40 4.90mm Chr, BIG D@12, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 3540.D Sw 12 1/2 Round 28.40 4.90mm Chr, BIG D@12, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 4003.B Sw 12 1/2 Round 28.40 4.90mm BIG D@12, Swp 6 1/2 & 11 1/2 90/150/25 395
RONDA 4004.B Sw 12 1/2 Round 28.40 4.90mm BIG D@12, Swp 6 1/2 & 11 1/2 90/150/25 395
RONDA 4120.B 12 1/2 Round 28.40 4.90mm Chr, BIG D@6, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 4120.B Sw 12 1/2 Round 28.40 4.90mm Chr, BIG D@6, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 4210.B 12 1/2 Round 28.40 4.90mm Chr, BIG D@12, 1-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 4210.B Sw 12 1/2 Round 28.40 4.90mm Chr, BIG D@12, 1-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 4212.B Sw 12 1/2 Round 28.40 4.90mm Chr, BIG D@12, 1-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 4220.B Sw 12 1/2 Round 28.40 4.90mm Chr, BIG D@6, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5010.B Sw 12 1/2 Round 28.40 4.40mm Chr, BIG D@12, 1-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5020.B 12 1/2 Round 28.40 4.40mm Chr, BIG D@6, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5020.B Sw 12 1/2 Round 28.40 4.40mm Chr, BIG D@6, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5021.D 12 1/2 Round 28.40 4.40mm Chr, BIG D@6, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5022.D Sw 12 1/2 Round 28.40 4.40mm Chr, D@6, 2-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5030.D 12 1/2 Round 28.40 4.40mm Chr, D@4, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5030.D Sw 12 1/2 Round 28.40 4.40mm Chr, D@4, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5040.B 12 1/2 Round 28.40 4.40mm Chr, BIG D@12, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5040.B Sw 12 1/2 Round 28.40 4.40mm Chr, BIG D@12, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5040.D 12 1/2 Round 28.40 4.40mm Chr, D@4, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5040.D Sw 12 1/2 Round 28.40 4.40mm Chr, D@4, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5040.D Sw H2 12 1/2 Round 28.40 4.40mm Chr, D@4, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5040.E Sw 12 1/2 Round 28.40 4.40mm Chr, D@6, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5040.F Sw 12 1/2 Round 28.40 4.40mm Chr, D@6, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5050.B 12 1/2 Round 28.40 4.40mm Chr, BIG D@6, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5050.B Sw 12 1/2 Round 28.40 4.40mm Chr, BIG D@6, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5050.C Sw 12 1/2 Round 28.40 4.40mm Chr,Day,BIG D@6, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5050.E Sw 12 1/2 Round 28.40 4.40mm Chr,Day,BIG D@6, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5130.B Sw 12 1/2 Round 28.40 4.40mm Chr, D@4, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5130.D 12 1/2 Round 28.40 4.40mm Chr, D@4, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 5130.D Sw/td> 12 1/2 Round 28.40 4.40mm Chr, D@4, 3-eye 6 1/2 & 11 1/2 90/150/25 395
RONDA 6003.B 11 1/2 Round 25.60 3.30mm BIG D, Swp 1 1/2 & 7 1/2 70/120/20 373
RONDA 6003.B Sw 11 1/2 Round 25.60 3.30mm BIG D, Swp 1 1/2 & 7 1/2 70/120/20 373
RONDA 6003.D Sw 11 1/2 Round 25.60 3.30mm D, Swp 1 1/2 & 7 1/2 70/120/20 373
RONDA 6004.B 11 1/2 Round 25.60 3.30mm BIG D@12, 1-eye 1 1/2 & 7 1/2 70/120/20 373
RONDA 6004.B Sw 11 1/2 Round 25.60 3.30mm BIG D@12, 1-eye 1 1/2 & 7 1/2 70/120/20 373
RONDA 6004.D Sw 11 1/2 Round 25.60 3.30mm D@3, 1-eye (Sm Sec) 1 1/2 & 7 1/2 70/120/20 373
RONDA 6203.B 11 1/2 Round 25.60 3.30mm BIG D@12, 1-eye 1 1/2 & 7 1/2 70/120/19 373
RONDA 6203.B Sw 11 1/2 Round 25.60 3.30mm BIG D@12, 1-eye 1 1/2 & 7 1/2 70/120/19 373
RONDA 7003.B Sw 15 Round 34.40 5.60mm BIG D@12 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 7003.L Sw 15 Round 34.40 5.60mm BIG D@12, Retro@6 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 7003.N Sw 15 Round 34.40 5.60mm BIG D@6, Retro@12 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 7004.B Sw 15 Round 34.40 5.60mm BIG D@12, Sm Sec 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 7004.D Sw 15 Round 34.40 5.60mm BIG D@6, Sm Sec 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 7004.N Sw 15 Round 34.40 5.60mm BIG D@6, Retro@12 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 7004.P Sw 15 Round 34.40 5.60mm BIG D@1, Retro@10 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 8040.B Sw 15 Round 34.40 5.60mm BIG D@12,3-eye 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 8040.D Sw 15 Round 34.40 5.60mm BIG D@12,3-eye 12 1/2 & 6 1/2 90/150/25/20 381
RONDA 8040.N Sw 15 Round 34.40 5.60mm BIG D@6, Retro Dy@12 12 1/2 & 6 1/2 90/150/25/20 381
RONDA Z50 13 1/4 Round 29.80 4.60mm Chr, D@6, 2-eye 12 1/2 & 6 1/2 90/150/20 381
RONDA Z60 Sw 13 1/4 Round 29.80 4.60mm Chr, D@4, 3-eye 12 1/2 & 6 1/2 90/150/20 381
SW EBAUCHE 308/31 8 3/4 Round 19.40 3.40mm D, Swp 4 & 11 70/120/20 377
SW EBAUCHE 310/11 10 1/2 Round 23.30 3.40mm Swp 2 & 8 70/120/20 397
SW EBAUCHE 310/31 10 1/2 Round 23.30 3.40mm D, Swp 2 & 8 70/120/20 397 Ronda 505
SW EBAUCHE 311/31 11 1/2 Round 25.60 3.40mm D, Swp 2 & 8 70/120/20 397 Ronda 515
SW EBAUCHE 682/11 6 3/4 x 8 15.15 x 17.80 2.75mm Swp 3 1/2 & 8 1/2 60/110/20 362 Ronda 763
SW EBAUCHE 682/13 6 3/4 x 8 15.15 x 17.80 2.75mm Swp 4 1/2 & 8 1/2 60/110/21 363 Ronda 763
SEIKO 1E20/20 3 1/4 Round 9.00 2.70mm 7 & 11 1/2 45/90 335
SEIKO 1F20/20 4 3/4 x 5 1/2 10.7 x 12.50 2.09mm 2 & 7 45/90 337
SEIKO 1N00/20 4 3/4 x 5 1/2 10.7 x 14.40 2.19mm 6 1/2 & 11 1/2 45/90 317
SEIKO 1N01/20 4 3/4 x 5 1/2 10.7 x 14.40 2.19mm Sweep 6 1/2 & 11 1/2 65/110/18 317
SEIKO 4N00 4 3/4 x 5 1/2 10.7 x 14.40 2.19mm 6 1/2 & 11 1/2 45/90 317 VC 00
SEIKO 4N01 4 3/4 x 5 1/2 10.7 x 14.40 2.19mm Sweep 6 1/2 & 11 1/2 65/110/18 317 VC 01
SEIKO 4T57/20 11 1/2 25.60 4.58mm Chr, D, Swp 1 & 6 65/110/20 371
SEIKO 5M63/20 12 Round 27.00 4.30mm D, Swp, Auto (AGS) 5 & 11 65/110/20 SK3023.44z NO SUB
SEIKO 5M65/20 12 Round 27.00 4.30mm D, Swp, 24hr, Auto 5 & 11 65/110/20 SK3023.44z NO SUB
SEIKO 6T63/20 13 1/2 13.50 5.10mm Chr, D, Swp 2&8, 4&11 65/110/20 394
SEIKO 7N00/10 6 3/4 x 8 15.15 x 17.80 2.10mm Low CP 6 1/2 & 12 1/2 65/110 321
SEIKO 7N01/10 6 3/4 x 8 15.15 x 17.80 2.10mm Swp, Low CP 6 1/2 & 12 1/2 65/110/20 364
SEIKO 7N01/20 6 3/4 x 8 15.15 x 17.80 2.10mm Swp 6 1/2 & 12 1/2 65/110/20 364
SEIKO 7N32/20 10 1/2 23.30 2.90mm D, Swp 1 & 7 65/110/20 371
SEIKO 7N33/20 10 1/2 23.30 2.90mm DD, Swp 1 & 7 65/110/20 371
SEIKO 7N36/20 10 1/2 23.30 2.78mm DD, Swp 1 & 7 65/110/20 371
SEIKO 7N42/20 11 1/2 25.60 2.90mm D, Swp 1 & 7 65/110/20 371
SEIKO 7N43/20 11 1/2 25.60 2.90mm DD, Swp 2 & 8 65/110/20 371
SEIKO 7N82/10 7 3/4 17.20 2.90mm DD, Swp, Low CP 5 1/2 & 12 45/90/20 364
SEIKO 7N82/40 7 3/4 17.20 2.90mm DD, Swp, High CP 5 1/2 & 12 45/90/20 364
SEIKO 7N83/40 7 3/4 17.20 2.90mm DD, Swp, High CP 5 1/2 & 12 65/110/20 364
SEIKO 7N89/10 7 3/4 17.20 2.60mm D, Low CP 5 1/2 & 12 45/90 364
SEIKO 7T32 - YM 52 12 12.00 3.70mm Chr, D, 3-eye 1 1/2 & 7 1/2 65/110/20 395 NO SUB
SEIKO 7T34 12 12.00 3.70mm Chr, 3-eye 1 1/2 & 7 1/2 65/110/20 395 NO SUB
SEIKO 7T35 12 12.00 3.70mm Chr, D, 3-eye 1 1/2 & 7 1/2 65/110/20 395 PC 21
SEIKO 7T62/20 12 12.00 3.70mm Chr, D, 3-eye 1 1/2 & 7 1/2 65/110/20 395
TIMEX M602 10 1/2 Round 23.30 3.23mm D, Swp 2 & 8 70/120/20 395 NO SUB
TIMEX M603 10 1/2 Round 23.30 3.76mm DD, Swp 2 & 8 70/120/20 395 NO SUB
TIMEX M653 5 1/2 x 6 3/4 13.0 x 15.15 3.18mm Swp 5 & 11 70/120/20 377 NO SUB
TIMEX M902 10 1/2 Round 23.30 3.65mm D, Swp 4 1/2 & 10 70/120/20 CR2016 NO SUB
TIMEX M903 10 1/2 Round 23.30 4.15mm DD, Swp 4 1/2 & 10 70/120/20 CR2016 NO SUB
TIMEX M904 13 1/2 Round 30.60 3.65mm EL, Swp 5 & 11 70/120/20 CR2016 NO SUB
TIMEX M905 13 1/2 Round 30.60 3.65mm EL, D, Swp 5 & 11 70/120/20 CR2016 NO SUB
TIMEX M921 11 1/2 Round 25.60 6.00mm EL, D@4, Min, Sec, 3-e 5 & 11 70/120/20 CR2016 NO SUB
TIMEX M927 11 1/2 Round 25.60 6.00mm D@4, Min, Sec, 3-eye 5 & 11 70/120/20 CR2016 NO SUB
TIMEX M953 5 1/2 x 6 3/4 13.0 x 15.15 3.65mm Swp 4 1/2 & 10 70/120/20 CR1216 NO SUB
TIMEX M954 8 3/4 Round 19.40 3.07mm EL, D, Swp 2 & 8 70/120/20 CR1216 NO SUB
TIMEX M955 8 3/4 Round 19.40 3.07mm EL, Swp 2 & 8 70/120/20 CR1216 NO SUB
TIMEX M956 8 3/4 Round 19.40 3.07mm EL, D, Swp 2 & 8 70/120/20 CR1216 NO SUB
EBOSA 701.310 11 1/2 Round 25.60 2.80mm D, Swp 4 & 11 70/120/20 371
REMEX HP 6641 11 1/2 Round 25.60 3.90mm D, Swp 2 1/2 & 8 1/2 90/150/22 395
PRECISION MM0901 13 1/4 13.25 4.50mm Swp, Chr (6H/3-Eye) 1 & 6 65/110/20 377
PUW PUW 900 6 3/4 x 8 15.15 x 17.80 2.50mm Swp, German 3 1/2 & 8 1/2 60/110/18 362
PUW PUW 9000 6 3/4 x 8 15.15 x 17.80 2.50mm Swp, Swiss, 6J-Gold 3 1/2 & 8 1/2 60/110/18 362